Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
CBH  
#1 Posted : Saturday, March 7, 2009 11:50:50 AM(UTC)
CBH

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 2

Changed my water filter yesterday. I installed the filter and after about 30 seconds I removed the new filter to check something. When I removed the filter there was a large pop of air. I re installed the filter and the fridge dispensed water fine. Today, no water. Never a problem before today. Is there something basic I can do to get this operational? Thanks for assistance, Charlie.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
dgramfan  
#2 Posted : Tuesday, March 10, 2009 6:09:26 PM(UTC)
dgramfan

Rank: Member

Groups: Registered
Joined: 3/10/2009(UTC)
Posts: 2

Hmmn?
I Had The Same Problem Problem On Mine. No Water To The Dispenser And No Water To The Ice Maker.
Check The Refrigerator Temp Dial. Some How Mine Got Set To A Coolder Temp Setting And The Water Supply Coil Line Inside The Rerigerator Compartment Froze. I Reset To A Warmer Setting And Waited A Day.
CBH  
#3 Posted : Tuesday, March 10, 2009 6:26:24 PM(UTC)
CBH

Rank: Member

Groups: Registered
Joined: 3/7/2009(UTC)
Posts: 2

Thanks for taking time to feedback. I think I just got some air in the line and needed to bleed it for a bit. All is well. Thanks again
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.