Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Flashing 'LOCK ON" LED on Kenmore Control Pnl
Options
Go to last post Go to first unread
Model: 665 Brand: Kenmore Age: 1 - 5 years
Previous Topic Next Topic
bobbyparagon  
#1 Posted : Tuesday, February 24, 2009 2:29:06 PM(UTC)
bobbyparagon

Rank: Member

Groups: Registered
Joined: 2/24/2009(UTC)
Posts: 7
The unit failed to drain last time it was used. Didn't find out until the following day. Coaxed it with the "Cancel/Drain" button and it drained. When loaded the next day, and attempted to start it, the LOCK ON LED was flashing and all the other keys were locked. I attempted to remove the LOCK ON but as I said all the keys were locked. The CANCEL DRAIN LED also would flash if pushed. But that's all I could do. I didn't find any codes in the users guide.

Does anyone know what the problem is?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Tuesday, February 24, 2009 3:17:03 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
The complete Model Number might help someone help you.
You are missing about 6 digits
THIS FORUM IS DEAD!!!!!!!
Back to top
bobbyparagon  
#3 Posted : Tuesday, February 24, 2009 3:32:10 PM(UTC)
bobbyparagon

Rank: Member

Groups: Registered
Joined: 2/24/2009(UTC)
Posts: 7
The Model number is 665

Ser 15812990 FJ4511946

Also it doesn't appear that any of the 'keys' are mashed or stuck. They all appear to have kick back.
Back to top
denman  
#4 Posted : Tuesday, February 24, 2009 5:29:18 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I think your full Model Number is 66515812990
It is made by Whirlpool

Here is the tech sheet
https://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208051291.pdf

Indicates that this is a shorted key in the keyboard error
This does not rule out that the control board is the problem.
I will try to find a wiring diagram for the keyboard so it can be tested with a meter

Hopefully someone else will jump in and add it
THIS FORUM IS DEAD!!!!!!!
Back to top
bobbyparagon  
#5 Posted : Wednesday, February 25, 2009 8:53:51 AM(UTC)
bobbyparagon

Rank: Member

Groups: Registered
Joined: 2/24/2009(UTC)
Posts: 7
I'm going to pull the touchpad in anticipation of the diagram. If it IS only the touchpad, is the part available separately? I couldn't seem to find it.

Thanks for the help, denman!
Back to top
denman  
#6 Posted : Wednesday, February 25, 2009 1:41:05 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I could not find the touchpad at AppliancePartsPros either.
You will probably have to call them to get a price and availability.

Now for the bad news I have been unable to find a keypad wiring diagram.
I think it is a matrix type (has diodes) so cannot help you on checking it.

You could try removing the ribbon cable from the control board and cleaning it's connector with some electronics cleaner or isopropyl alcohol and a toothbrush. Just be sure that all the solvent has evaporated before reconnecting. This is a bit of a long shot.

If the above does not work then you unfortunately are left with a gamble as to which part is gone as either the keypad or the control board could cause this problem.
My guess would be the keypad.
THIS FORUM IS DEAD!!!!!!!
Back to top
Gene  
#7 Posted : Wednesday, February 25, 2009 5:00:55 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Just to add my 2 cents...

As [COLOR="DarkSlateBlue"]denman[/COLOR] said locked out controls indicates a stuck key(s). The solution is to replace the console which comes with the keypad. If you need the right part number for the console then post the color of it.

Gene.
Back to top
bobbyparagon  
#8 Posted : Wednesday, February 25, 2009 7:01:00 PM(UTC)
bobbyparagon

Rank: Member

Groups: Registered
Joined: 2/24/2009(UTC)
Posts: 7
The Console touch pad is WHITE. I'm going to pull the console tomorrow morning and check the ribbon cable connection as well. What about cooling the touch pad in the freezer then exerting a vacuum on each "touch key" and see if that can't un-stick something; a little shock and awe :-)

I assume the touchpad is a sealed unit with elastomeric/membrane type keys.
Back to top
Gene  
#9 Posted : Thursday, February 26, 2009 2:41:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: bobbyparagon Go to Quoted Post
...What about cooling the touch pad in the freezer then exerting a vacuum on each "touch key" and see if that can't [B]un-stick something;...


Very interesting! Let us know how it will work.

I found that Whirlpool (the manufacturer of your dishwasher) does not make white consoles for this model any more. Only black consoles are still available.

- The part number for the black console is AP3097085

Gene.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET