Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool dryer sensing light won't go off
Options
Go to last post Go to first unread
Model: GEW9269PW0 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
lsgress  
#1 Posted : Monday, January 9, 2012 3:55:12 PM(UTC)
lsgress

Rank: Member

Groups: Registered
Joined: 1/9/2012(UTC)
Posts: 5
I have a Whirlpool gew9260PW0 electric dryer that whenever I try to start it the sensing light turns on and the dryer will not start. I have checked the thermal fuses, belt brake switch and the themal transistor. All test good...
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
lsgress  
#2 Posted : Monday, January 9, 2012 3:58:12 PM(UTC)
lsgress

Rank: Member

Groups: Registered
Joined: 1/9/2012(UTC)
Posts: 5
The Dryer Thermister does not show up as good when doing a continutity test, could this be the problem?
Back to top
denman  
#3 Posted : Tuesday, January 10, 2012 3:20:41 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for GEW9269PW0 models | AppliancePartsPros.com

Here is a manual. It is for a GEW9200 and I do not know what if any changes where made when they went to a 9269.
http://appliancedigest.com/index.php?/files/file/325-l-69-whirlpool-duet-gas-electric-dryers-service-manual/
You have to join the site to download the manual but it is free and this is a very good site for manuals and other info for the appliance repair DIYer.

I cannot say if a bad thermistor would stop the unit but the manual does give it's specs.
Also see Page 6-1 for the diagnostics.

Attach one meter lead to the neutral on the plug. The other lead should go to P1-4 on the control board.
Use a low meter scale.
With the door open resistance should be infinite.
With the door closed resistance should be around 1 to 2 ohms.

lso check the P1-3 goes to 0 ohms when the door closes.
THIS FORUM IS DEAD!!!!!!!
Back to top
lsgress  
#4 Posted : Tuesday, January 10, 2012 5:17:09 PM(UTC)
lsgress

Rank: Member

Groups: Registered
Joined: 1/9/2012(UTC)
Posts: 5
Replaced the dryer thermistor same problem. Any ideas?
Back to top
lsgress  
#5 Posted : Tuesday, January 10, 2012 5:44:28 PM(UTC)
lsgress

Rank: Member

Groups: Registered
Joined: 1/9/2012(UTC)
Posts: 5
How do you get fault codes? I do the button test and it does not come up with any code.
Back to top
lsgress  
#6 Posted : Tuesday, January 10, 2012 5:59:31 PM(UTC)
lsgress

Rank: Member

Groups: Registered
Joined: 1/9/2012(UTC)
Posts: 5
When in the diagnostics mode and I press start the display shows 08 and the motor won't start. Does this mean anything?
Back to top
denman  
#7 Posted : Wednesday, January 11, 2012 2:41:58 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I cannot find that code.

Check the continuity of the motor circuit back to the board.
If OK then the board is probably toast.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (6)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET