Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Replaced magnetron
Options
Go to last post Go to first unread
Model: ? Brand: Kenmore Age: Less than 1 year
Previous Topic Next Topic
Ironhead17  
#1 Posted : Monday, November 28, 2011 12:32:44 PM(UTC)
Ironhead17

Rank: Member

Groups: Registered
Joined: 11/28/2011(UTC)
Posts: 3
Hey guys - new here - Thanks for all who contribute!! I love fixing things myself and need solid knowledgeable advice like found here.

On to the point:

I replaced the magentron and fixed the initial problem but created a new one. Initially it wouldn't heat and was making a loud hum. Now it heats fine but as the turntable is rotating it will start to buzz and the lights will begin to glow (it's freaky). If you turn the lights on and then operate it, the noise goes away and the lights appear normal.

Did I cause this by turning the machine over while repairing it?

Any ideas?

Thanks - Wade
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Ironhead17  
#2 Posted : Tuesday, November 29, 2011 2:02:57 PM(UTC)
Ironhead17

Rank: Member

Groups: Registered
Joined: 11/28/2011(UTC)
Posts: 3
As a followup, the buzzing goes awy complete;y when the lights are on Low. It buzzes when on high (lights). Model # 721.62622200 Kenmore OTR.

It's been suggested that a wire is pinched so my plan is to take it down and have a look see.

Any helpful diagnostic ideas appreciated.

Wade
Back to top
Gene  
#3 Posted : Tuesday, November 29, 2011 6:00:28 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Wade,

Looks like you are on the right track. Also try to pinpoint that noise.

Gene.
Back to top
Ironhead17  
#4 Posted : Sunday, December 11, 2011 7:08:48 AM(UTC)
Ironhead17

Rank: Member

Groups: Registered
Joined: 11/28/2011(UTC)
Posts: 3
Followup-

I took it down and tried to find any bound wires or anything that could contribute to the buzzing and lights flashing while in operation. I discovered that without the outer cover on it operates like a charm. No noise no flashing lights, it works like it should. But as soon as a few screws are in placed and its turned on it buzzes like a piece or cr*p.
We may just have to live with it. It seems to heat well ( i noticed the center of the plate of bacon was slow to cook...) and the buzzing can be minimized by turning the light to low.
I suspect the replacement part just doesn't work well w/ the original parts. 10QBP0228 is the part number of the replacement magnetron. The part is not returnable. What do I do?
Back to top
Gene  
#5 Posted : Monday, December 12, 2011 3:07:20 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If it happened right after you replaced the magnetron then you may want to get it exchanged under the part warranty and try another one.

Gene.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Replaced Magnetron Exterior light surges (Microwave Repair)
by sbehunin 1/15/2018 12:51:16 PM(UTC)
replaced magnetron still does not work (Microwave Repair)
by mvimazal 9/4/2008 12:07:11 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET