can set bake temp however the broiler is on the whole time. Top burns bottom... - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

can set bake temp however the broiler is on the whole time. Top burns bottom raw Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: AER5715QAQ	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

humannnature		#1 Posted : Thursday, December 1, 2011 7:50:09 PM(UTC)
Rank: Member Groups: Registered Joined: 12/1/2011(UTC) Posts: 1		Oven worked perfect. Then one day I started to bake a pie. Top burnt to a crisp the bottom of the pie was raw. Since then everything I cook does the same thing. I can set the baking temp and oven shows it is heating as normal. Beeps when it tells me it is up to temp. However whatever you put in is burnt to a smoking crisp on top and the bottom is just raw or slightly cooked.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Friday, December 2, 2011 2:49:55 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for AMANA AER5715QAQ RANGE- S/C F/S ELE \| AppliancePartsPros.com See the attachment for the wiring diagram. Also here is a manual. 16025644 Maytag Amana Electric Freestanding Range Service Manual - ApplianceDigest.com You have to join the site to download the manual but it is free and this is a very good site for manuals and other info for the appliance repair DIYer. You said it preheats as usual but does it take longer than it used to. It sounds like the bake element is not coming on. If it at no time gets red check it. Also there is a diagnostic you could run on the tech sheet. Unplug the stove. This is very important because on most units there is still voltage to one side of the element even when it is turned off. Undo the screw/s holding the element to the back of the oven. Carefully pull the element into the oven. Remove the wires from it and check it with a meter. Should be around 20 ohms. It is a good idea to clip something (clothespin etc.) to the wires so they do not disappear into the back of the unit while you are checking the element. File Attachment(s): AER5715.pdf (310kb) downloaded 0 time(s).
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close