Rank: Member
Groups: Registered
Joined: 10/6/2011(UTC) Posts: 5
|
My machine was in outside storage and the pump froze and cracked. I replaced the pump and belt and after getting the belt on right it worked fine for a few days. Now the washer basket does not drain in the spin cycle. I took the pump off and looked for obstuctions, none found. I reassembled and it still does not pump out. The port for the washer drain hose is at the basement ceiling. If I lower the drain hose it does drain (into a 5 gallon bucket level with the top of the washer)
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
Well since it will drain there is no obstruction. This pump is directly driven by the motor, so if the motor is turning there is something wrong with the pump.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close