Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Imperial Commercial upright Freezer
Options
Go to last post Go to first unread
Model: UL4000ECW2 Brand: -brand- Age: 5 - 10 years
Previous Topic Next Topic
tdfreeman  
#1 Posted : Tuesday, August 3, 2010 9:48:04 AM(UTC)
tdfreeman

Rank: Member

Groups: Registered
Joined: 8/3/2010(UTC)
Posts: 2
Not sure the brand says Imerial on door. The upper portion of the door does not adhere when closed. It has a gap which causes the upper part of the freezer to have ice build up rapidly. I don't know if I just need a new seal or if I need the inner part of the door. Trying to find out what parts I need to buy.
:confused:
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, August 3, 2010 12:07:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Is the door gasket physically broken?

Is the door twisted?

Here are the breakdown diagrams and Door replacement parts for FRIGIDAIRE UL4000ECW2 | AppliancePartsPros.com

Gene.
Back to top
tdfreeman  
#3 Posted : Tuesday, August 3, 2010 1:32:59 PM(UTC)
tdfreeman

Rank: Member

Groups: Registered
Joined: 8/3/2010(UTC)
Posts: 2
No the gaskit is not broken and the door does not seem to be bent or twisted. The top of the door just does not seal anylonger. So I don't know if I need to order just the gasket or the middle portioin of the door. They seem to be two seperate pieces the gasket being 124. and the middle part being 185.59
Back to top
Gene  
#4 Posted : Tuesday, August 3, 2010 1:44:37 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Before order any parts you may want to try to adjust the gasket using a hair dryer. After you will get the door sealed properly, tape it closed for a few hours.

Gene.
Back to top
hotfire97  
#5 Posted : Wednesday, October 19, 2011 2:34:03 PM(UTC)
hotfire97

Rank: Member

Groups: Registered
Joined: 10/19/2011(UTC)
Posts: 1
did you ever get this fixed my imperial does the same thing?
Back to top
Guest  
#6 Posted : Wednesday, June 9, 2021 5:27:33 AM(UTC)
Guest

Rank: Guest

Groups:
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
My name is Mike I'm having the same problem, with my gasket the hing side is good bottom good handle side just below the lock upward it starts to gap about 1/2 " continues to the hing, so if I use a hair dryer and strap the door this should cure the problem I see where the gasket is shrunk in if not ill order a new gasket
Back to top
Users browsing this topic
Guest (5)
Similar Topics
Imperial Commercial Upright Freezer (Refrigerator & Freezer Repair)
by jmmullin 5/31/2015 5:32:52 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET