Rank: Member
Groups: Registered
Joined: 12/24/2008(UTC)
Posts: 4
|
Gas dryer seems to do everything right but is not heating the cloths. The ignighter comes on at first but no flame ever lights up. I took the front panel off and check the ressistance of the coils and they seemed on target (2-terminal one was ~1200 and 3-terminal one was ~1300 and 560). After putting it together and testing it actually did work once (flame lit up). However its not doing it anymore. :(
Should I go first with replacing those coils?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
|
Replace the coils. Every once in awile the whole gas valve has to be replaced, but I would replace the coils first. Very easy, and cheap repair. Tom
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/24/2008(UTC)
Posts: 4
|
yup, with the new coils its working great!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
