Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Hotpoint electric Range erratic heating
Options
Go to last post Go to first unread
Model: RB755GT1WH Brand: Hotpoint Age: 5 - 10 years
Previous Topic Next Topic
fixitman  
#1 Posted : Sunday, December 28, 2008 10:35:13 AM(UTC)
fixitman

Rank: Member

Groups: Registered
Joined: 12/28/2008(UTC)
Posts: 3
I am currently experiencing erratic temperatures in the oven of approximately 50 + degrees. I used an oven thermometer to check the temps at each setting and came up with +/- 12 deg. F. at each setting. But when a roast or pie is cooked it sometimes is necessary to boost the temp by about 50 deg. to complete the cooking. It is a digital model with an analog dial for the oven settings. Any advise would be greatly appreciated.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kayakcrzy  
#2 Posted : Sunday, December 28, 2008 2:45:24 PM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
I worked on the same model last week, and the oven was doing the same thing, and I replaced the oven sensor, and it took care of the problem. The senser part # is WB21X158. Tom
Back to top
fixitman  
#3 Posted : Sunday, December 28, 2008 8:33:07 PM(UTC)
fixitman

Rank: Member

Groups: Registered
Joined: 12/28/2008(UTC)
Posts: 3
Originally Posted by: kayakcrzy Go to Quoted Post
I worked on the same model last week, and the oven was doing the same thing, and I replaced the oven sensor, and it took care of the problem. The senser part # is WB21X158. Tom

Thank you so much. I suspected that component but was also suspecting a bad control unit. Is there a way to determine the sensor defectiveness through testing with an ohm meter?
Back to top
kayakcrzy  
#4 Posted : Monday, December 29, 2008 3:45:45 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Usually when there is that little of a temp difference, it is usually the sensor. If you also look, in your book, you might be able to adjust your temp through the control board. I believe you can on that model. Tom
Back to top
fixitman  
#5 Posted : Monday, December 29, 2008 9:26:22 AM(UTC)
fixitman

Rank: Member

Groups: Registered
Joined: 12/28/2008(UTC)
Posts: 3
Again, thank you for your help. I will get the manual located and try adjusting the temp first.
Back to top
kayakcrzy  
#6 Posted : Tuesday, December 30, 2008 5:06:38 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
That is a good idea. Tom
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET