The machine is working with all the cycle except the spin cycle that mean the machine wash and drain the water but when it reach to the spin cycle will not spin therefore the cloth still wet, I already change the motor start switch, my machine is the top loader machine, any advised?

Thanks.

Replace the drive coupler:)

Check the lid switch!!! HAPPY HOLIDAYS!!!!!!!!!!:)

The lid switch has been changed, it's new. The water is draining in the rinse mode/cycle but not in spin cycle/mode. It doesn't drain completely in the spin mode.
in the spin cycle the basket does not move or spin at all.

thanks for the help and happy holidays to all.

Just finished working on similar problem with my Maytag Alantis...Turned out the portion of the drive pully on the main shaft that is suposed to disingage the brake when the motor reverses for the spin cycle was worn and not backing the brake off, I fixed the problem with a larger shim between the "C" clip that holds the drive pully on and the drive pully itself, thus pressing down harder on the brake. I have know idea if your machien even operates this way but its worth a try, if your drum feels siezed.

Good Luck