19 Pages<12345>» Go to Page...

bosch dishwasher troubleshoot manual Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: SHU/SHI/SHV	Brand: Bosch	Age: Less than 1 year
Previous Topic Next Topic

JBM		#21 Posted : Friday, November 14, 2008 8:57:06 PM(UTC)
Rank: Member Groups: Registered Joined: 11/9/2008(UTC) Posts: 14		Hi Harold, do you happen to know where I could get a similar trouble shooting manual for a Bosch SMU 3036? Appreciated. Blake
User Profile View All Posts by User View Thanks

downtube		#22 Posted : Monday, November 17, 2008 4:40:33 PM(UTC)
Rank: Member Groups: Registered Joined: 7/1/2008(UTC) Posts: 6		The wiring connector diagram for the SHU 33 in this manual does not match the connector in my SHU 33; not even close. Mine is shu33a06uc/22. Any ideas?
User Profile View All Posts by User View Thanks

thirsty		#23 Posted : Monday, November 17, 2008 5:37:02 PM(UTC)
Rank: Member Groups: Registered You have been a member since:: 11/17/2008(UTC) Posts: 1		Very nice. Thank you for posting it.
User Profile View All Posts by User View Thanks

ken828		#24 Posted : Sunday, December 21, 2008 5:55:48 PM(UTC)
Rank: Member Groups: Registered Joined: 12/19/2008(UTC) Posts: 1		Thanks for the help I repaired the burnt connection on circuit board
User Profile View All Posts by User View Thanks

jdago		#25 Posted : Thursday, January 1, 2009 11:03:22 AM(UTC)
Rank: Member Groups: Registered Joined: 1/1/2009(UTC) Posts: 2		I cant download this info, it shows a error in message is there another way
User Profile View All Posts by User View Thanks

Gene		#26 Posted : Saturday, January 3, 2009 9:36:01 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		jdago, There is nothing wrong with the link. Try to use a different browser. Gene.
User Profile View All Posts by User View Thanks

bruceport122		#27 Posted : Sunday, January 4, 2009 10:41:13 PM(UTC)
Rank: Member Groups: Registered Joined: 1/4/2009(UTC) Posts: 1		I also found and soldered the burnt connection on the control board. It's a pain to open the plastic housing the board is in, but don't worry about cutting a couple of the plastic prongs out of the way.....dishwasher works very well again....I do wish there were an economy cycle....it takes about an hour and a half....
User Profile View All Posts by User View Thanks

jdago		#28 Posted : Wednesday, January 7, 2009 6:50:22 PM(UTC)
Rank: Member Groups: Registered Joined: 1/1/2009(UTC) Posts: 2		thank you, it worked
User Profile View All Posts by User View Thanks

shibumi2		#29 Posted : Sunday, January 11, 2009 8:06:49 AM(UTC)
Rank: Member Groups: Registered Joined: 1/11/2009(UTC) Posts: 1		great find...saveda service call!!
User Profile View All Posts by User View Thanks

Tkellyaok		#30 Posted : Saturday, January 17, 2009 3:51:06 AM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2009(UTC) Posts: 1		Thanks! Been looking for this for awhile
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

19 Pages<12345>» Go to Page...