Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
CURTIS FAIRGRIEF  
#1 Posted : Friday, October 26, 2007 3:16:15 PM(UTC)
CURTIS FAIRGRIEF

Rank: Member

Groups: Registered
Joined: 10/26/2007(UTC)
Posts: 2

i have worked on several washers over the years. most of them to take the aggitator out i just took off the cover & removed bolt or nut and it came off. this one doesnt have bolt or nut. can you help me.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Saturday, October 27, 2007 6:20:07 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Just put a rope under the agitator and loop it around a 2x4 and pry up, the longer the 2x4 the better.
CURTIS FAIRGRIEF  
#3 Posted : Saturday, October 27, 2007 6:36:44 PM(UTC)
CURTIS FAIRGRIEF

Rank: Member

Groups: Registered
Joined: 10/26/2007(UTC)
Posts: 2

Thank You. Worked Perfect. I Figured It Probably Came Off That Way. But For All The Years I Have Been A Tech In The Automotive & Power Equiptment World, Its Nice To Know The Right Way, Instead Of Trial & Error. God Bless You.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.