Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
nutz_n_boltz  
#1 Posted : Wednesday, July 20, 2011 1:33:52 PM(UTC)
nutz_n_boltz

Rank: Member

Groups: Registered
Joined: 7/20/2011(UTC)
Posts: 1

Our Maytag Performa dishwasher doesn't do anything when you press the buttons on the control panel. No lights, nothing.

About a year ago I replaced the door latch (latch had broken) & switches with new ones, and it was working good. Then this.

I cannot figure out, by looking at parts breakdowns, exactly "which" part I need to buy for it to work again. Are there any general control testing procedures with specs for this model dishwasher? If the control panel doesn't work, is it the panel itself, or the control board? I have info on testing everything but the control panel/board.

Any help would be greatly appreciated. Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, July 20, 2011 3:13:59 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If everything is dead, the first thing you may want to check is the power to the dishwasher.

Check for 120 VAC at the wall outlet.

Remove the bottom panel and check the wires at the junction box (#19 & #21 on the diagram). Make sure the black wire from the power cord is connected to the dishwasher black wire.

Check for 120 VAC to the door switches.

Here are the breakdown diagrams and Replacement parts for MAYTAG PDBL390AWW DISHWASHER- UNDERCOUNTER | AppliancePartsPros.com

Gene.
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.