Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
sween  
#1 Posted : Saturday, October 27, 2007 10:32:22 AM(UTC)
sween

Rank: Member

Groups: Registered
Joined: 10/27/2007(UTC)
Posts: 3

The top of the dryer is much warmer than usual so we are getting heat, yet the clothes are not drying. Exhaust hose was checked, cleaned, and there is no noiceable blockage or excesssive lint. Our home is only 6 months old so I would not think there was a clog somewhere in the tubing thru out the house. What could it be?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
fixxit  
#2 Posted : Saturday, October 27, 2007 10:35:23 AM(UTC)
fixxit

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/25/2007(UTC)
Posts: 68

turn on your dyrer and check your outside vent to see how much airflow is actualy making it outside. this will tell you if you have a restriction in the vent line
sween  
#3 Posted : Saturday, October 27, 2007 10:40:37 AM(UTC)
sween

Rank: Member

Groups: Registered
Joined: 10/27/2007(UTC)
Posts: 3

will do. Will check to see if I'm getting good airflow from dryer too.

Thanks.
sween  
#4 Posted : Saturday, October 27, 2007 10:45:37 AM(UTC)
sween

Rank: Member

Groups: Registered
Joined: 10/27/2007(UTC)
Posts: 3

plenty of airflow from dryer. If vent leading outside is clogged is there anyway to clear it myself or do we need to call a tech?
fixxit  
#5 Posted : Saturday, October 27, 2007 11:29:45 AM(UTC)
fixxit

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/25/2007(UTC)
Posts: 68

you can clear it your self, but it may entale some crawling under the house if thats where your venting goes. it so you will find 1 of 2 possibilitys. Flex venting (great from the dryer to the wall) or straight venting. remember the shortest and least restance for you venting is a straight line(flex tubing tends to sag and create nests of lint) but is easier to pull out. and straight vent allows for less pockets(lint nests) but is oftimes rivited together. this is one you gotta decide get dirty and save some money or pay what might be a hefty cost (Techs dont realy like to get THAT dirty)LOL
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.