Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
No heat after installing LP conversion kit
Options
Go to last post Go to first unread
Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
kenokagi  
#1 Posted : Sunday, July 10, 2011 4:37:56 PM(UTC)
kenokagi

Rank: Member

Groups: Registered
Joined: 7/10/2011(UTC)
Posts: 5
I just received and installed an LP conversion kit for my gas dryer. Now it doesn't heat at all. I have tried the procedure outlined in the directions: to turn the timer to "off" and wait 5 minutes and then try again. I have tried it several times. I have taken the dryer back apart to make sure all of the connections have been made correctly. As far as I can tell, they have.

When I peek in through the little viewport at the bottom, I don't see any activity. I can't tell if the ignition coil is warming at all.

Thanks in advance for any help.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kenokagi  
#2 Posted : Monday, July 11, 2011 11:32:28 AM(UTC)
kenokagi

Rank: Member

Groups: Registered
Joined: 7/10/2011(UTC)
Posts: 5
As an additional note: this dryer was working just fine prior to the installation of the LP kit.
Back to top
Gene  
#3 Posted : Monday, July 11, 2011 1:37:15 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What is the complete model number of the dryer?

Gene.
Back to top
kenokagi  
#4 Posted : Monday, July 11, 2011 2:46:42 PM(UTC)
kenokagi

Rank: Member

Groups: Registered
Joined: 7/10/2011(UTC)
Posts: 5
417.91042000
Back to top
Gene  
#5 Posted : Monday, July 11, 2011 4:00:04 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You may want to start the troubleshooting from the igniter. Check it for continuity.

- The igniter Part number: AP3674313
Part number: AP3674313



Gene.
Back to top
kenokagi  
#6 Posted : Monday, July 11, 2011 6:23:26 PM(UTC)
kenokagi

Rank: Member

Groups: Registered
Joined: 7/10/2011(UTC)
Posts: 5
Should I start by putting the old igniter back in? The kit came with its own igniter, which is different from the one pictured. The old one was like that. The new one is in a spiral pattern, and has a different mount, which goes with the different burner unit.
Back to top
Gene  
#7 Posted : Tuesday, July 12, 2011 2:57:07 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What is the part number of the kit and how did you find it?

Gene.
Back to top
kenokagi  
#8 Posted : Tuesday, July 12, 2011 3:42:37 PM(UTC)
kenokagi

Rank: Member

Groups: Registered
Joined: 7/10/2011(UTC)
Posts: 5
Originally Posted by: Gene Go to Quoted Post
What is the part number of the kit and how did you find it?

Gene.


The part number is AP3572301. I found and ordered it through Appliance Part Pros via the model number of the dryer.

Part Details - FRIGIDAIRE Lp Conversion Kit, part number: AP3572301
Back to top
Gene  
#9 Posted : Wednesday, July 13, 2011 2:29:21 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The part number is correct. Possible the igniter got damaged during the installation. You have to check it for continuity.

Gene.
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET