Frigidare washer won't spin Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: FLSE60RGS1	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

jordan1957		#1 Posted : Monday, October 22, 2007 5:49:59 PM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2007(UTC) Posts: 8		I am working on my son's washer dryer combo. The machine agitates fine, but when it goes to spin the motor turns but the belt don't. It acts like it wants to move. I have replaced the belt and the tensioner seems fine. I can turn the transmission by hand, but it doesn't seem that easy.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

richappy		#2 Posted : Monday, October 22, 2007 6:24:27 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Did you use the factory specified belt?? If not, just order the right one at this site.
User Profile View All Posts by User View Thanks

jordan1957		#3 Posted : Monday, October 22, 2007 6:30:06 PM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2007(UTC) Posts: 8		Yes I used the factory specified belt.
User Profile View All Posts by User View Thanks

richappy		#4 Posted : Tuesday, October 23, 2007 1:04:58 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Shine a bright lite in the spin basket and check for something in the tub. Also, if the belt doesn't smoke in spin, you probably have a weak idler pulley spring.
User Profile View All Posts by User View Thanks

jordan1957		#5 Posted : Tuesday, October 23, 2007 10:59:26 AM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2007(UTC) Posts: 8		The belt had burnt in the spin. Then I replaced it.
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Tuesday, October 23, 2007 1:43:48 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		This confirms either a jammed tub or bad tranny. Go to www.applianceaid.com for take apart info to pull the spin basket out.
User Profile View All Posts by User View Thanks

jordan1957		#7 Posted : Thursday, October 25, 2007 11:29:27 AM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2007(UTC) Posts: 8		I have ordered a new tranny, bearing, and seal. Is whatever fluid that is in the tranny already come in the new one or do I need to get some?
User Profile View All Posts by User View Thanks

richappy		#8 Posted : Friday, October 26, 2007 12:57:00 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Tranny ALWAYS comes filled with oil. I wish you well with this rather big job. Please keep us posted,and I hope the info at ww.applianceaid will be sufficient to do the job. Sorry, I just checked that site and they don't give tranny replacement info. You might try Google
User Profile View All Posts by User View Thanks

jordan1957		#9 Posted : Monday, November 5, 2007 4:52:25 PM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2007(UTC) Posts: 8		This wasn't as bad as I expected. Machine works great and I ordered the parts on a Tueday afternoon at 2:30 and they were at my door on Wednesday evening. Had this not been a washer dryer combo that costs $800.00 to $900.00 to replace I would not have done it.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)