Rank: Member
Groups: Registered
Joined: 9/14/2009(UTC)
Posts: 2
|
After unloading the night's before and reloading last nights dishes we attemped to start the DW. No Joy, The clean light was flashing but we couldnt make it do anything else. I read on this forum that you can reboot pushing heated dry normal wash then heated dry, normal wash. That cleared the flashin light and allowed me to start the DW BUT it only fills with water then hums a little then goes quiet. If I push cancel it will pump out the water.
Any thoughts?
Thanks
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/14/2009(UTC)
Posts: 2
|
UPDATE, Just for the heck of it I tried to run it through a smart wash cycle. It filled .. then I can hear the morot (pump) running but no water is splashin around inside. could this be a cloged selonoid?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/10/2011(UTC)
Posts: 1
|
Mine is doing the a same thing! No one is responding this problem in other posts ether.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
[COLOR="Blue"]spicermech[/COLOR]
You might have more luck starting your own post using "Post New Topic" in this forum section.
Also a complete model number would help.
Sears numbers are 3 numbers, a period and then 6 to 8 additional numbers.
Note: That Sears does not manufacture anything so even with a complete model number sometimes we cannot cross reference the unit back to the manufacturer to get tech info. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
