maytag neptune front loader leak - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

maytag neptune front loader leak Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MAH4000AWQ	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

paulp937		#1 Posted : Wednesday, May 25, 2011 1:28:43 PM(UTC)
Rank: Member Groups: Registered Joined: 5/25/2011(UTC) Posts: 2		my washer leaks out the front door. i replaced the boot and the seal and it still leaks. Im wondering if it is overfilling and the pressure from the water is pushing out on the door allowing it to leak by. If so what do i do?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Wednesday, May 25, 2011 4:44:45 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Remove the door and the front panel. Put the front panel aside and install the door back. Run the washer and watch where it's leaking from. Post the results. Here are the breakdown diagrams and Replacement parts for MAYTAG MAH4000AWQ WASHER- HORIZONTAL AXIS \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

paulp937		#3 Posted : Monday, May 30, 2011 6:01:29 AM(UTC)
Rank: Member Groups: Registered Joined: 5/25/2011(UTC) Posts: 2		:) I could watch the pressure of the water push out on the door until it finally let the water leak out at the bottom of the door. I did find the air hose to the pressure switch had a small hole rubbed into it where it had lain against the concrete counter balance. I patched the hole and the machine now works fine again. Thanks for you help!


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Monday, May 30, 2011 4:59:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. I'm glad it was a simple fix. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close