2 Pages12> Go to Page...

The novice Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GSD2030Z01WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

lgb1243@msn.com		#1 Posted : Saturday, November 8, 2008 7:59:41 AM(UTC)
Rank: Member Groups: Registered Joined: 11/8/2008(UTC) Posts: 8		My dishwasher has one spray arm that will not rotate. I have cleaned the filter on the bottom of the basin but am wondering how to remove the spray arm without breaking off the two tabs that hold it down in place? I have tried pulling them back but they are not very flexible and I am afraid I will snap them off.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

abadfish66		#2 Posted : Saturday, November 8, 2008 8:16:26 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		Stick a screwdriver in there and turn it counterclockwise and the whole assembly will unscrew from the tub.
User Profile View All Posts by User View Thanks

lgb1243@msn.com		#3 Posted : Saturday, November 8, 2008 9:38:13 AM(UTC)
Rank: Member Groups: Registered Joined: 11/8/2008(UTC) Posts: 8		The arm came right out thank you for the reply. I see no buildup or blockage of any kind. Still get little or no pressure to lift rinser or spin arm. Am I now looking at a weak pump?
User Profile View All Posts by User View Thanks

abadfish66		#4 Posted : Saturday, November 8, 2008 9:41:49 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		Put the sprayarm back in, start the washer, and when it's done filling tell me how much water is in there, you might not have enough water.
User Profile View All Posts by User View Thanks

lgb1243@msn.com		#5 Posted : Saturday, November 8, 2008 9:47:18 AM(UTC)
Rank: Member Groups: Registered Joined: 11/8/2008(UTC) Posts: 8		Doesn't seem to keep any water laying in the bottom. The only water is in the drain basin.
User Profile View All Posts by User View Thanks

abadfish66		#6 Posted : Saturday, November 8, 2008 9:55:00 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		Can you hear it filling with water when you start it?
User Profile View All Posts by User View Thanks

lgb1243@msn.com		#7 Posted : Saturday, November 8, 2008 10:17:05 AM(UTC)
Rank: Member Groups: Registered Joined: 11/8/2008(UTC) Posts: 8		I don't hear it filling and it seems like it is pumping it out.
User Profile View All Posts by User View Thanks

abadfish66		#8 Posted : Saturday, November 8, 2008 10:44:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		You need to figure out if it is draining while it's filling or is it just not filling?
User Profile View All Posts by User View Thanks

abadfish66		#9 Posted : Saturday, November 8, 2008 10:46:32 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		If it's draining when filling, do this. Take off the kickplate at the bottom. To the left of the motor is the drain solenoid, is it melted and stuck in the down position?
User Profile View All Posts by User View Thanks

lgb1243@msn.com		#10 Posted : Saturday, November 8, 2008 11:06:49 AM(UTC)
Rank: Member Groups: Registered Joined: 11/8/2008(UTC) Posts: 8		It seems to hold maybe a 1/2" of water at most. Water has come in enough to raise the sprayer somewhat. Is the device in the front left corner a float switch? It seems to be draining and filling at the same time.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

2 Pages12> Go to Page...