Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Maytag Atlantis won't spin
Options
Go to last post Go to first unread
Model: MAV6257AWW Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
Richard T  
#1 Posted : Wednesday, November 5, 2008 9:08:22 AM(UTC)
Richard T

Rank: Member

Groups: Registered
Joined: 11/5/2008(UTC)
Posts: 5
Maytag Atlantis model MAV6257AWW wont spin when clothes are in. When empty, it will go through a cycle but it makes a loud whining noise. Can you tell me what part(s) I need?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
v2k04  
#2 Posted : Wednesday, November 5, 2008 9:14:24 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
When they get about 5 years of age they usually need a pump a belt a thrust bearing kit and the brake and stator and you just as well replace the snubber while you'r at it however you need to make a brake releas tool unless ya want to pay maytag 120 for one
Back to top
Richard T  
#3 Posted : Wednesday, November 5, 2008 9:26:21 AM(UTC)
Richard T

Rank: Member

Groups: Registered
Joined: 11/5/2008(UTC)
Posts: 5
How would one go about making a brake tool?
Back to top
v2k04  
#4 Posted : Wednesday, November 5, 2008 10:23:04 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
You're lucky I just happen to be working on one lol
v2k04 attached the following image(s):
1105081317.jpg
Back to top
Richard T  
#5 Posted : Wednesday, November 5, 2008 10:26:14 AM(UTC)
Richard T

Rank: Member

Groups: Registered
Joined: 11/5/2008(UTC)
Posts: 5
huh? I am not sure I get the picture.
Back to top
v2k04  
#6 Posted : Wednesday, November 5, 2008 11:29:11 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
You're Looking At The Bottom Of The Machine With The Tool Installed On The Brake compressing spring Thrust bearing and tranny pully and Stator Removed
Back to top
magician59  
#7 Posted : Wednesday, November 5, 2008 1:38:23 PM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
Originally Posted by: v2k04 Go to Quoted Post
When they get about 5 years of age they usually need a pump a belt a thrust bearing kit and the brake and stator and you just as well replace the snubber while you'r at it however you need to make a brake releas tool unless ya want to pay maytag 120 for one

I just received my brake and seal tool from ************ today. Cost me $108.37 with shipping. Took less than 7 days to get here.
Back to top
Richard T  
#8 Posted : Thursday, November 6, 2008 5:18:57 AM(UTC)
Richard T

Rank: Member

Groups: Registered
Joined: 11/5/2008(UTC)
Posts: 5
Is there any other way to replace the brake? I hope to not have to do this again.
Back to top
v2k04  
#9 Posted : Thursday, November 6, 2008 5:26:29 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
No not really there is a big spring you are compressing with the tool
Back to top
magician59  
#10 Posted : Thursday, November 6, 2008 7:05:48 AM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
I read some time ago that if you find three 8-32 screws a half inch longer than the ones holding the stator in place, you can put them in, back out the short ones, then very slowly back out the long screws to remove the rotor. I have never tried this, but it seems plausible.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Maytag Atlantis Won't Spin (Washer Repair)
by jeffk14 12/11/2012 11:37:06 AM(UTC)
Maytag Atlantis won't spin (Washer Repair)
by moofly 3/7/2011 8:00:37 AM(UTC)
Maytag Atlantis won't spin (Washer Repair)
by Ryokincaid 3/18/2010 1:22:15 PM(UTC)
Maytag Atlantis won't spin or drain I think I screwed up (Washer Repair)
by Desperate for help 2/9/2008 3:33:08 AM(UTC)
Maytag Atlantis won't spin at full speed (Washer Repair)
by datafortress 9/29/2007 9:43:21 PM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET