high spin intermittent - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

high spin intermittent Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GSW9650LWO	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

rail		#1 Posted : Monday, October 6, 2008 8:30:19 AM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2008(UTC) Posts: 5		My washer will drain and go into high spin most of the time on the first load. On the second load and after, it will not go into high spin most of the time. I have to turn off the washer for 10-15 minutes and then it will go into high spin after I rotate the timer to a rinse/spin setting and it works. It's like something is getting hot and it has to cool down, then I rotate the timer to a rinse/spin setting for it to drain and high spin.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

libertyappl		#2 Posted : Monday, October 6, 2008 8:37:33 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		I would say that the motor switch is overheating, not allowing the unit to go into high spin. Nat


User Profile View All Posts by User View Thanks

rail		#3 Posted : Monday, October 6, 2008 8:48:26 AM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2008(UTC) Posts: 5		Thank you! I'll look into that.


User Profile View All Posts by User View Thanks

Drags1998		#4 Posted : Monday, October 6, 2008 3:08:43 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/7/2008(UTC) Posts: 750		Are you using He detergent?, if not,thats your problem. If you are, use LESS soap. Do you see soap suds when its washing? You should not see SUDS!!!! 90% of the problems I see with these machines is SOAP RELATED!!!!


User Profile View All Posts by User View Thanks

richappy		#5 Posted : Tuesday, October 7, 2008 1:53:32 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		You might have dragging brake shoes. Remove the pump and motor and turn the tranny coupler clockwise. If very hard to turn when the spin basket engages, you have something stuck in the tub or dragging brake shoes. If you continue to use it, you will burn out the motor.


User Profile View All Posts by User View Thanks

rail		#6 Posted : Wednesday, November 5, 2008 7:36:33 AM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2008(UTC) Posts: 5		I am using HE detergent. I always thought I needed to see plenty of suds so I reduced the amount of HE detergent and I haven't had a problem since.


User Profile View All Posts by User View Thanks

rail		#7 Posted : Sunday, November 16, 2008 8:28:48 AM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2008(UTC) Posts: 5		I found a burnt contact in my motor switch. Replaced switch. Works great! Thank you!


User Profile View All Posts by User View Thanks

libertyappl		#8 Posted : Sunday, November 16, 2008 8:35:10 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Glad you got it going!! Nat


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close