Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Compressor does not work
Options
Go to last post Go to first unread
Model: 106.53293202 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
Mario Purnavel  
#1 Posted : Monday, November 3, 2008 10:23:56 PM(UTC)
Mario Purnavel

Rank: Member

Groups: Registered
Joined: 11/3/2008(UTC)
Posts: 1
I have a bad start relay. I am trying to start the compressor with a 3 in 1 relay. The compressor runs, but get hot. The metal part in front between doors get hot too. Please help!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
icehouse  
#2 Posted : Tuesday, November 4, 2008 1:01:24 AM(UTC)
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440
Are you sure the compressor is running. You can switch the run and start leads momentarily from the 3N1 to "bump" the compressor. As far as the strip between the doors it is called a "mullion heater" or anti-sweat heater.
Back to top
kayakcrzy  
#3 Posted : Tuesday, November 4, 2008 4:16:29 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
You might want to check and see if the condenser motor, which is right next to the compressor is running. They have a replacement kit for that motor. They have had a few problems with it. So if it is not running tell them you want the replacement kit, that is a different motor, and it comes with the new fan blade in the box. The discharge line from the compressor runs up that center strip to stop any sweating, if it gets too hot the motor is either not running, or nor running fast enough. Let us know. Tom ApplianceEducator.com
Back to top
icehouse  
#4 Posted : Tuesday, November 4, 2008 4:29:29 AM(UTC)
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440
:o Losing my mind in my old age. It is a "Yoder-loop"
Back to top
kayakcrzy  
#5 Posted : Tuesday, November 4, 2008 1:44:54 PM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
NA NA NA NA NA NA!!!! Young wipersnapper. LOL!! Tom ApplianceEducator.com
Back to top
icehouse  
#6 Posted : Tuesday, November 4, 2008 2:06:50 PM(UTC)
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440
:eek: Young ha ha ha I remember the Westinghouse with the "ratcheting timer".:)
Back to top
kayakcrzy  
#7 Posted : Tuesday, November 4, 2008 2:28:32 PM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Oh Yea, I remember the maytag dryer, that had the sensor, in the drum, where the wet clothes would send a charge to the capacitor, and then the capacitor, would then advance the timer. Oh, it had 2 belts too. Tom ApplianceEducator.com
Back to top
icehouse  
#8 Posted : Tuesday, November 4, 2008 2:53:50 PM(UTC)
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440
And of course the "Bendix" front-loader.:)
Back to top
Users browsing this topic
Guest (7)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET