Rank: Member
Groups: Registered
Joined: 10/30/2008(UTC)
Posts: 4
|
First of all I smelled an electrical fire smell. Then the dishwasher would stay in one cycle and not advance. Took the bottom plate off and the black power wire was burned. I cleaned it up and put the wire nut back on. Turned it on and you know how after a minute the water starts going into the dishwasher...well, no water. Tested the solenoid with the ohm meter and it is good, but then discovered that there is no power going to the solenoid. There is power going to the dishwasher (black wire) but no power going to the water inlet solenoid. How do I fix it?
Thanks,
Ann Marie
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi Ann Marie, Most likely the problem is a bad control unit. - The part number for the control unit is AP3387110 Here are the break down diagrams for the Bosch dishwasher Model SHU3305 UC/12 (FD 8003 -)Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/30/2008(UTC)
Posts: 4
|
Thank you so much for answering my question. I appreciate your help so much.
Ann Marie
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You are welcome. Keep us posted.
Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
