Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bbarb  
#1 Posted : Thursday, October 30, 2008 9:24:54 AM(UTC)
bbarb

Rank: Member

Groups: Registered
Joined: 10/30/2008(UTC)
Posts: 3

My husband and I just replaced the control module on our Bosch. We ran the dishwasher through a cycle empty and now the "CL" won't clear off of the display and the diswasher won't run. What did we do wrong/what's wrong now?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, November 3, 2008 3:36:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Did you take the jumper off the old control module and use it on the new one?

Gene.
bbarb  
#3 Posted : Tuesday, November 4, 2008 5:00:04 AM(UTC)
bbarb

Rank: Member

Groups: Registered
Joined: 10/30/2008(UTC)
Posts: 3

Yes. We put the jumper back exactly as it was on the old module. We have reinstalled the old module and the dishwasher is working but with the same poor wash results--endless cycle.
Gene  
#4 Posted : Tuesday, November 4, 2008 1:23:47 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
So what is the problem: "endless cycle" or "CL" on the display? Can you be more specific, please?

Gene.
bbarb  
#5 Posted : Wednesday, November 5, 2008 5:44:49 AM(UTC)
bbarb

Rank: Member

Groups: Registered
Joined: 10/30/2008(UTC)
Posts: 3

The original module was replaced because the dishwasher was running for hours and the dishes were less than clean. When we hooked up the new module we ran it through one cycle empty. It seemed to run correctly but at the end of the cycle we couldn't clear the "CL" from the display--we flipped the circuit breaker and even removed and reinstalled the new module(it still displayed "CL"). We reinstalled the old module and that is working, but with the same poor results.
Gene  
#6 Posted : Wednesday, November 5, 2008 12:45:12 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sounds like the new part is defective. Who ever sold it to you, has to exchange the part.

Gene.
Users browsing this topic
Guest (3)
Similar Topics
Bosch Dishwasher dirty water in filter " hole" (Dishwasher Repair)
by Guest 5/14/2024 9:47:25 AM(UTC)
Bosch dishwasher SHVM78Z53N/01 (Dishwasher Repair)
by Guest 5/8/2024 8:58:29 PM(UTC)
Bosch Dishwasher SHE3ARF6UC/22 E15 Error (Dishwasher Repair)
by codyace 3/29/2024 11:51:41 AM(UTC)
Bosch Dishwasher Display Goes Out After Latching Door (Dishwasher Repair)
by Guest 3/11/2024 7:00:18 PM(UTC)
Bosch dishwasher troubleshooting (Dishwasher Repair)
by Dan T in SD 12/7/2023 2:38:23 PM(UTC)
Bosch Dishwasher intermittently leaking on lower right of door (Dishwasher Repair)
by jjtrinva 11/5/2023 9:30:06 AM(UTC)
Bosch Dishwasher Model SHE3AR56UC/07 (Dishwasher Repair)
by EDK1747 8/30/2023 7:42:58 AM(UTC)
Bosch Dishwasher SHE3AR56UC/07 (Dishwasher Repair)
by Guest 8/27/2023 11:27:21 AM(UTC)
Bosch Dishwasher skips to "clean" even after part replacement (Dishwasher Repair)
by Guest 6/20/2023 5:17:19 PM(UTC)
Bosch dishwasher SHX65T55UC/07 not dispensing soap unless in "Express" mode (Dishwasher Repair)
by callussun 4/19/2023 9:46:00 PM(UTC)
Bosch dishwasher shem3ay 55n/25 (Dishwasher Repair)
by Guest 3/23/2023 5:18:20 AM(UTC)
Bosch dishwasher only drains on reset and specific cycle (Dishwasher Repair)
by vusedad 10/18/2022 8:54:46 AM(UTC)
Bosch dishwasher model SMV41D10EU/48 Not working (Dishwasher Repair)
by adriandlb 10/7/2022 12:18:47 AM(UTC)
Bosch Dishwasher SHX68T55UC/02 Leak Identified: How to Fix? (Dishwasher Repair)
by jonneytaee 8/31/2022 4:48:51 AM(UTC)
Bosch Dishwasher Model SHPM65Z56N (Dishwasher Repair)
by Guest 7/8/2022 9:00:03 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.