stove top works/clock on/oven controls dead Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: YGY396LXPQ00	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

jrob		#1 Posted : Wednesday, October 10, 2007 6:03:29 AM(UTC)
Rank: Member Groups: Registered Joined: 9/17/2007(UTC) Posts: 6		just replaced the oven control module still getting error code PF I have the 240v to the board the question i have, would the keyboard(touch panel) cause this problem, it is attached to module through a membrane connector is there a way to test these switches?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Pegi		#2 Posted : Wednesday, October 10, 2007 1:49:10 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/3/2007(UTC) Posts: 73		Sounds like you are getting "noise interference", there are several service pointers addressing this problem but none with model numbers that match yours, might call Whirlpool with your model and serial to see if they know which kit may be available for your unit...
User Profile View All Posts by User View Thanks

jrob		#3 Posted : Thursday, October 11, 2007 4:56:58 AM(UTC)
Rank: Member Groups: Registered Joined: 9/17/2007(UTC) Posts: 6		sounds like your saying keypad is not the problem customer says when power outage occurs stove always came back with PF when power restored, until he pushed the cancel button so i take it the keypad OR membrane if defective we would be getting this PF and cannot clear it
User Profile View All Posts by User View Thanks

richappy		#4 Posted : Friday, October 12, 2007 1:37:11 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Remove keypad ribbon cable and turn power on, if now no problem, replace keypad. Click on your model # to get it.
User Profile View All Posts by User View Thanks

jrob		#5 Posted : Friday, October 12, 2007 6:10:47 AM(UTC)
Rank: Member Groups: Registered Joined: 9/17/2007(UTC) Posts: 6		yes but with membrane unplug i get the E1 F2 Error code which means keytail unpluged but before that, PF is there for a few seconds so how do you figure that out?
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Friday, October 12, 2007 5:29:38 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		All the symptoms show a stuck keypad. I would replace it.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

Similar Topics

stove top works/clock on/oven controls dead (Oven Repair (including Ranges and Cooktops)) by jrob 9/17/2007 5:55:24 AM(UTC)