Agitator Removal Maytag Model A612S - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Agitator Removal Maytag Model A612S Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: A612S	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

wymo		#1 Posted : Thursday, October 16, 2008 7:34:36 AM(UTC)
Rank: Member Groups: Registered Joined: 10/16/2008(UTC) Posts: 3		How does one remove the this agitator. I want to clean the underside of the agitator. (We are seeing black spots on clothes after the washing cycle is complete...softener / detergent residue, perhaps?)


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

v2k04		#2 Posted : Thursday, October 16, 2008 9:52:27 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		The black spots you are seeing is more than likely oil coming up the transmission shaft. Probably time to retire that 30 year old machine and look for something else. It wont do you any good to remove agitator theres nothing to clean and you need a specialty tool to do it.


User Profile View All Posts by User View Thanks

wymo		#3 Posted : Thursday, October 16, 2008 11:23:19 AM(UTC)
Rank: Member Groups: Registered Joined: 10/16/2008(UTC) Posts: 3		How would one know if it is indeed tranny oil? Is there somewhere I can look to see if that is the problem? Thanks!


User Profile View All Posts by User View Thanks

Drags1998		#4 Posted : Thursday, October 16, 2008 11:32:42 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/7/2008(UTC) Posts: 750		The agitator is removed by removing a 1/4" headed screw in the side of the agitator(about half way down the agitator) Its also possible that the junk your getting is soap build-up, put a cup of calgone water softener and a cup of CLEAR HOUSEHOLD AMOINA in the machine,Fill it with HOT water and put it through a FULL cycle(no cloths) REPETE 2TIMES:D OIL is YELLOW, UNDISOLVED SOAP is BLACK and GOOKIE!!!!


User Profile View All Posts by User View Thanks

wymo		#5 Posted : Thursday, October 16, 2008 12:05:07 PM(UTC)
Rank: Member Groups: Registered Joined: 10/16/2008(UTC) Posts: 3		I have removed that 1/4" screw twice thinking it would free the agitator. It doesn't. (when pulling up on the agitator bottom it flexes from the force.) There must be something else holding it in place?


User Profile View All Posts by User View Thanks

Drags1998		#6 Posted : Thursday, October 16, 2008 12:53:27 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/7/2008(UTC) Posts: 750		The ONLY thing that holds it on is that 1 screw!!! (and maybe a little rust):D


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close