Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
garryusbonds  
#1 Posted : Friday, February 4, 2011 12:43:06 PM(UTC)
garryusbonds

Rank: Member

Groups: Registered
Joined: 3/17/2009(UTC)
Posts: 7

I am having my kitchen remodeled and have moved the dishwasher in and out a few times. Since then the spring action on the doors is noticeably louder (even allowing for the sound dampening panel removed) and a slow drip which seems to be coming from the left bottom side of the door during the spray cycles. Any Suggestions??

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Friday, February 4, 2011 2:26:43 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Pull the dishwasher out of the cabinet enough to see the door hinges and springs. Inspect the hinges, springs and cables on both sides. Post the results.

Here are the breakdown diagrams and Replacement parts for FRIGIDAIRE FDB2415LFC0 Frigidaire/dishwasher | AppliancePartsPros.com

Gene.
garryusbonds  
#3 Posted : Saturday, March 12, 2011 10:39:45 AM(UTC)
garryusbonds

Rank: Member

Groups: Registered
Joined: 3/17/2009(UTC)
Posts: 7

Gene:

Sorry for the delay since your response. Pulled out dishwasher and the springs, cable and arm assembly seem to be OK. I ran my finger along the bottom door gasket and there seems to be about a 12" piece missing in the middle. I can't tell from the part photo whether this is normal.
Gene  
#4 Posted : Saturday, March 12, 2011 2:50:01 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Are you sure the door is not dislodged?

Gene.
garryusbonds  
#5 Posted : Saturday, March 12, 2011 3:10:34 PM(UTC)
garryusbonds

Rank: Member

Groups: Registered
Joined: 3/17/2009(UTC)
Posts: 7

The door fits securely around the the sides and top, and the latch catches so I don't think the door is dislodged. Is there a way to ensure that the bottom is hinged correctly?
Gene  
#6 Posted : Saturday, March 12, 2011 3:23:47 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Very likely the cause of this problem as well as the solution are described in the document attached to the reply.

- The bottom door gasket Part number: AP3959846
Part number: AP3959846



Gene.
File Attachment(s):
garryusbonds  
#7 Posted : Saturday, March 12, 2011 3:26:27 PM(UTC)
garryusbonds

Rank: Member

Groups: Registered
Joined: 3/17/2009(UTC)
Posts: 7

Thanks, for the price of the part, it's worth a try.

I'll let you know.
garryusbonds  
#8 Posted : Saturday, April 23, 2011 5:19:03 AM(UTC)
garryusbonds

Rank: Member

Groups: Registered
Joined: 3/17/2009(UTC)
Posts: 7

I installed the part you recommended, a bottom door gasket, and I also installed side splash shields upon recommendation at the parts store. Thanks for your help.

I have another problem with the DW since moving it around. The springs creak and moan like a dungeon door every time we open and close the door. All the parts seem to be in place. Do you have any suggestions for dampening the noise??
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.