Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
replace tub seal
Options
Go to last post Go to first unread
Model: WBSE2090 Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
lhurt  
#1 Posted : Sunday, October 7, 2007 1:41:26 PM(UTC)
lhurt

Rank: Member

Groups: Registered
Joined: 10/7/2007(UTC)
Posts: 3
i need to replace the tub seal and bearing and i have the parts. but i cant finded out how to get the agitator asm off to get to the nuts holding the seal.
i also cant fined a repair manual online. all the ones i find i would have to order. can you please advis me on where i can fine this infoor how to remove the agitator asm.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
ApplianceJunk  
#2 Posted : Sunday, October 7, 2007 3:18:03 PM(UTC)
ApplianceJunk

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
Quote:
i also cant fined a repair manual online


Not much of a GE man myself, just don't see that many around here.
If you or anyone else finds the digital manual for this washer I too would be interested in seeing it.
Back to top
lhurt  
#3 Posted : Sunday, October 7, 2007 11:04:36 PM(UTC)
lhurt

Rank: Member

Groups: Registered
Joined: 10/7/2007(UTC)
Posts: 3
Well Thanks for Trying to help look for a manual.
The good news is i found GE was nice enough to put some repair and trouble shooting on paper inside the controll pannel tape to the back wall.That showed how to disassemble the washer and run trouble shooting.
THE BAD NEWS .. when the tub seal leaked it took out the lower bearing on the transmission break assembly that is sold as one unit as far as i can tell.
Don't know if its worth putting that kind money into this unit.
any idea's id like to hear them..well ive had enough fun for today.
Back to top
richappy  
#4 Posted : Monday, October 8, 2007 1:07:43 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I would not fix this washer, not worth it. I have one that is around 6 years old and the spin basket nut is rusted so bad I can't remove it.
Would appreciate if anyone knows how to remove this nut!!
Back to top
lhurt  
#5 Posted : Monday, October 8, 2007 5:39:57 AM(UTC)
lhurt

Rank: Member

Groups: Registered
Joined: 10/7/2007(UTC)
Posts: 3
the nut on the spin basket is a 1,11/16 inch lefthand thread. was rusted and unmoveable i dont recommend this !!!! But i cut it off with a 1/4 cold chisel and hammer. It took me an hour to carefully cut it off.Then i used a wire brush and thread chaser to clean up the shaft.
Back to top
iblashaun  
#6 Posted : Monday, November 12, 2012 7:10:52 PM(UTC)
iblashaun

Rank: Member

Groups: Registered
Joined: 3/16/2011(UTC)
Posts: 14
try some w d 40 and let it soak
Back to top
Users browsing this topic
Guest (4)
Similar Topics
how difficult to replace tub seal and bearings (Washer Repair)
by nbeckham 6/5/2012 8:58:12 PM(UTC)
Need to replace tub seal, bearings and . . . entire transmission? (photo attached) (Washer Repair)
by amyz 10/27/2010 8:05:26 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET