GE profile dryer not drying - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

GE profile dryer not drying Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DPGT750EC1PL	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

bill007		#1 Posted : Thursday, February 24, 2011 4:03:16 PM(UTC)
Rank: Member Groups: Registered Joined: 2/24/2011(UTC) Posts: 4		I have read the other post and tested the inverter. My blower motor wants to move and moves very slowly in both directions for a sec or two. So my question are: 1. Is it the blower motor or is it one of the Thermistor assembly? 2. Is it worth replacing all three componets, motor and both thermistor? Any help would be greatly appreciated. Bill


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Jeff / APP Team		#2 Posted : Friday, February 25, 2011 9:54:38 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		It sounds like a bad blower motor. Here is a link to a forum page that will answer alot of your questions. By what your saying, the way it is working points to the motor. Hope this helps. http://forum.appliancepartspros...drying-blower-motor.html


User Profile View All Posts by User View Thanks

bill007		#3 Posted : Friday, February 25, 2011 10:12:28 AM(UTC)
Rank: Member Groups: Registered Joined: 2/24/2011(UTC) Posts: 4		Originally Posted by: Jeff / APP Team It sounds like a bad blower motor. Here is a link to a forum page that will answer alot of your questions. By what your saying, the way it is working points to the motor. Hope this helps. http://forum.appliancepartspros...drying-blower-motor.html Jeff, Is it worth replacing both the #272 Thermistor assembly Part Number: AP3794646 and # 471 Thermistor assembly Part Number: AP3794837? Let me know thanks. Bill


User Profile View All Posts by User View Thanks

Jeff / APP Team		#4 Posted : Friday, February 25, 2011 10:22:21 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		You can test the thermistors, they should ohm out around 10,000 ohms at room temperature. If they test good, I would just change the motor.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close