Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
robbieandshaka  
#1 Posted : Thursday, December 13, 2007 5:58:10 AM(UTC)
robbieandshaka

Rank: Member

Groups: Registered
Joined: 12/7/2007(UTC)
Posts: 1

Initially service man diagnosed as control board which I ordered and replaced. It now has power and lights which work but it will not start. Another service person diagnosed as control panel which I replaced but still will not start so it was not that. Where do I go next????
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
bentwrench1999  
#2 Posted : Thursday, December 20, 2007 8:16:50 AM(UTC)
bentwrench1999

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/14/2007(UTC)
Posts: 72

You should now check your thermal fuse. If it fails, your motor will not start. The Number on the part is 3390719..located on the blower housing.
Remove the front lower panel to access ..wrench:)
ushakant  
#3 Posted : Thursday, February 24, 2011 5:08:54 PM(UTC)
ushakant

Rank: Member

Groups: Registered
Joined: 2/24/2011(UTC)
Posts: 2

I would advise you to sell it asis and no return no replace you better buy a usd one which will be cheaper than repair
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.