2 Pages12> Go to Page...

No Control Panel Lights and Oven not working Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: RF196LXQ1	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

Kivey		#1 Posted : Monday, February 7, 2011 9:14:58 AM(UTC)
Rank: Member Groups: Registered Joined: 2/6/2011(UTC) Posts: 8		I have a Whirlpool RF196LXQ1 that the control panel lights do not work.The Top burners work fine but the burner lights will not come on either.Also the oven dont work and the oven light burns out as soon as you push the rocker switch on for the oven light.I checked the power and I have 240 to the board.Could someone please help with the trouble shooting.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Monday, February 7, 2011 1:56:22 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		How did you check the voltage to the control board? There is a letter missing in the model number you posted. Verify and repost it please. Gene.
User Profile View All Posts by User View Thanks

Kivey		#3 Posted : Monday, February 7, 2011 3:06:34 PM(UTC)
Rank: Member Groups: Registered Joined: 2/6/2011(UTC) Posts: 8		I went back and looked and the model # is RF196LXK.Im getting the # from the book that came with it.I cannot find a # on the stove at all.The contol part # is PS985982.I checked the voltage at the plug that plug into the board.Thanks for your time.
User Profile View All Posts by User View Thanks

Kivey		#4 Posted : Tuesday, February 8, 2011 5:30:47 AM(UTC)
Rank: Member Groups: Registered Joined: 2/6/2011(UTC) Posts: 8		Does the stove have a in line fuse somewhere for this coltroller?I know that the power leaving the board going to the oven light and the lights on the controller is not 240v.Need some help Please
User Profile View All Posts by User View Thanks

Gene		#5 Posted : Tuesday, February 8, 2011 2:31:24 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The model number should be on the oven door frame or on the frame behind the bottom drawer. There are no fuses or any other safety devices, so if the display is blank then most likely the problem is a bad control board. If you need the correct part number then try to find the complete model number. Gene.
User Profile View All Posts by User View Thanks

Kivey		#6 Posted : Tuesday, February 8, 2011 2:42:31 PM(UTC)
Rank: Member Groups: Registered Joined: 2/6/2011(UTC) Posts: 8		Here is the correct Model # RF368LXKQ They are no lights on the controller,the light in the oven blows as soon as it is turned on,and the hot suurface light does not work either.Neeed the oven before the weekend please help.
User Profile View All Posts by User View Thanks

Gene		#7 Posted : Tuesday, February 8, 2011 2:56:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Very likely there is something wrong with the neutral line to the range. You may want to check it at the outlet. The tech sheet with the wiring diagrams for the model number you posted is attached to the reply. Here are the breakdown diagrams and Replacement parts for WHIRLPOOL RF368LXKQ0 | AppliancePartsPros.com Gene. File Attachment(s): Tech Sheet - 8053296 for RF368LXKQ0.pdf (197kb) downloaded 8 time(s).
User Profile View All Posts by User View Thanks

Kivey		#8 Posted : Tuesday, February 8, 2011 6:00:43 PM(UTC)
Rank: Member Groups: Registered Joined: 2/6/2011(UTC) Posts: 8		That fixed the light but the controller still dont work.Could that have damage the controller.
User Profile View All Posts by User View Thanks

Gene		#9 Posted : Sunday, February 13, 2011 11:06:44 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: Kivey That fixed the light but the controller still dont work.Could that have damage the controller. What did you do to fix the light? Gene.
User Profile View All Posts by User View Thanks

Kivey		#10 Posted : Monday, February 14, 2011 3:37:53 AM(UTC)
Rank: Member Groups: Registered Joined: 2/6/2011(UTC) Posts: 8		I repaired the Neutral and that fixed the 120v to the oven light and the surface hot lights.I had to purchase a a control board to get the oven to work.Its all repaired now.Thanks
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest

2 Pages12> Go to Page...