Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jhillman1  
#1 Posted : Thursday, January 20, 2011 8:39:33 AM(UTC)
jhillman1

Rank: Member

Groups: Registered
Joined: 1/20/2011(UTC)
Posts: 1

My Whirlpool refrigerator stops cooling until I turn them temperature knob to off wait a few seconds, then turn it back to normal cooling. It will then cool correctly for a few hours(or days in some cases). You can hear it seem to turn something off, then the compressor comes on when the knob turns to normal cooling.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Joe / APP Team  
#2 Posted : Friday, January 21, 2011 8:35:44 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: jhillman1 Go to Quoted Post
My Whirlpool refrigerator stops cooling until I turn them temperature knob to off wait a few seconds, then turn it back to normal cooling. It will then cool correctly for a few hours(or days in some cases). You can hear it seem to turn something off, then the compressor comes on when the knob turns to normal cooling.


J,

Based on the information in your post,

My first inclination would be a loose connection, or a damaged contact in the defrost timer.

Part number: AP3110896
Part number: AP3110896


That's where I would start, if it were me.

You may want to test the cold control circuit, to eliminate that as a problem as well, while you've got the control panel down and can access both components.

Do you have a multi meter, so you can test circuits ?

:) :) :)
denman  
#3 Posted : Friday, January 21, 2011 2:00:30 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Other things you may want to check is the thermostat itself.

Also when it stops cooling are the evaporator and the condenser fan off.
These are wired in parallel with the compressor, so if they are on the compressor should be on.
If it is not then perhaps your start relay is no good.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.