Rank: Member
Groups: Registered
Joined: 1/9/2011(UTC) Posts: 1
|
During Self-Cleaning cycle on Upper Oven, the display went blank. Door is locked and wont open. Turned the breaker off for some time and then restart, still no display and door is still locked...Please help...:confused:
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/1/2008(UTC) Posts: 2,429
|
What most likely happened is when you put the oven in the clean cycle, it blew the thermostat in the back. What you can do is take the oven out of the wall, and take the top back panel off, and in the middle there will be a round part, with 2 wires coming to it. That is the thermostat. If you have a meter ohm it, out. Make sure you do this with the oven power off. You could jump it out if you like, and turn the power on, and see if the board lights up. If so, you need to replace the thermostat, and the sensor, because ther oven got to hot, and blew the thermostat. Oh, don't run the oven with the thermostat, jumped out. It is a saftey, and it did the job, so oven doesn't burn down the house. PROMICE????? Tom Appliance Educator, Appliance Parts, Washer and Dryer Parts, Refridgerator and Freezer Parts, Stove and Oven Parts
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close