2 Pages12> Go to Page...

part number for WFW9200SQ00 Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: WFW9200SQ00	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

tomlao		#1 Posted : Saturday, August 23, 2008 3:42:47 AM(UTC)
Rank: Member Groups: Registered Joined: 8/22/2008(UTC) Posts: 7		HELP!! I have a WFW9200SQ00 and it's DEAD! Nothing comes on except the lock button. When the power button is pressed, I hear three chimes. I bought a control electic board (8183261), replaced it and still the same.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

libertyappl		#2 Posted : Saturday, August 23, 2008 6:54:40 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Try running it thru diagnositc first, see if you get any error codes. Execute this procedure with an empty drum. All of the steps below must be done in sequence in order to reach the Diagnostic test. This executes the automatic test only. 1. Close the door. 2. Push power. 3. Select the “Drain and Spin” program. 4. Deselect the rinse option (for Kenmore only). 5. Select “No spin”. 6. Push “Prewash” option four times within five seconds. If Prewash is not present on this model, press “Extra Rinse” option four times within five seconds. 7. The automated test program is started (not possible to skip steps). 8. To cancel the test program press the “Stop” button. Post your results Nat
User Profile View All Posts by User View Thanks

tomlao		#3 Posted : Saturday, August 23, 2008 1:41:03 PM(UTC)
Rank: Member Groups: Registered Joined: 8/22/2008(UTC) Posts: 7		There are no lights so I can not even get into the diagnotic test you posted. Only button works is the lock and the power buttom gives three beeps. no other buttons work.
User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Saturday, August 23, 2008 5:28:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Have your tried unplugging the machine to see if the control board will function again?
User Profile View All Posts by User View Thanks

tomlao		#5 Posted : Saturday, August 23, 2008 7:23:49 PM(UTC)
Rank: Member Groups: Registered Joined: 8/22/2008(UTC) Posts: 7		Yes. Switch the breaker as well. is it true that electronics has 2yrs warrantee?
User Profile View All Posts by User View Thanks

libertyappl		#6 Posted : Sunday, August 24, 2008 6:07:01 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Depending on where you bought the control board, it should have a 90 day warranty from where purchased(at least we get a 90 warranty as a business) Nat
User Profile View All Posts by User View Thanks

tomlao		#7 Posted : Sunday, August 24, 2008 8:24:18 PM(UTC)
Rank: Member Groups: Registered Joined: 8/22/2008(UTC) Posts: 7		Thanks for all your posting. Do you know the part number for the cpu board on the left side of the machine?
User Profile View All Posts by User View Thanks

libertyappl		#8 Posted : Sunday, August 24, 2008 8:28:13 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Behind the control panel?
User Profile View All Posts by User View Thanks

tomlao		#9 Posted : Monday, August 25, 2008 8:07:17 AM(UTC)
Rank: Member Groups: Registered Joined: 8/22/2008(UTC) Posts: 7		yes. it's a combo board in a "T" shape. You'll see it when you open the top panel. From the front, it's on the right side. Sorry, I'd said left earlier.
User Profile View All Posts by User View Thanks

libertyappl		#10 Posted : Monday, August 25, 2008 1:26:41 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		That is the main microcomputer, machine control part number AP3968028, $218.51, from this site. Nat
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

2 Pages12> Go to Page...