Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
CHENEYD  
#1 Posted : Thursday, December 2, 2010 6:09:14 PM(UTC)
CHENEYD

Rank: Member

Groups: Registered
Joined: 12/2/2010(UTC)
Posts: 2

NOT A GIBSON... it is a GE model Dishwasher) My daughter just bought a house (built in 2006) when she pulls out the bottom rack the front rollers drop into a hole/gap between the dw tub and the dw open door rattling the dishes. What part is missing? I have a different model in my home and I can't tell how the wheels are supposed to bridge the gap. Can you help?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, December 3, 2010 12:51:39 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is the parts breakdown
Replacement parts for General Electric GSD3900L00CC Dishwasher | AppliancePartsPros.com

Usually the each side of the rack has two rollers at the front.
The front roller then rests on the door before the rear roller comes off the tub rail.
Perhaps one of these is missing.
OR
Perhaps the rack is in the dishwasher backwards as the rear of the rack only has a single roller on each side.
THIS FORUM IS DEAD!!!!!!!
CHENEYD  
#3 Posted : Saturday, December 4, 2010 5:45:11 PM(UTC)
CHENEYD

Rank: Member

Groups: Registered
Joined: 12/2/2010(UTC)
Posts: 2

Thanks so much denman for your reply....I checked and sure enough, the front of the rack only has 2 rollers! It is missing an additional set in front!! Can't imagine who loses a set of rollers out of a dishwasher! Renters are rough! Thanks much!
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.