Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool DU810SWKU0 dishwasher won't wash
Options
Go to last post Go to first unread
Model: DU810SWKU0 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
jc1506  
#1 Posted : Wednesday, August 20, 2008 4:01:23 PM(UTC)
jc1506

Rank: Member

Groups: Registered
Joined: 8/20/2008(UTC)
Posts: 4
Hello,

My dishwasher will fill with water but instead of water spraying around inside, it will just hum. Can someone help me with what could be wrong and if I will need a new part(s)? It's about 5 yrs. old and hasn't been used too often.

Thanks!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Wednesday, August 20, 2008 7:12:36 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Can you check underneath for any kids of water leakage around the pump & motor?
Nat
Back to top
jc1506  
#3 Posted : Thursday, August 21, 2008 7:12:00 AM(UTC)
jc1506

Rank: Member

Groups: Registered
Joined: 8/20/2008(UTC)
Posts: 4
I didn't see any water on the floor around the motor and pump when I pulled the bottom panel off. I can pull the dishwasher from the counter for a better look but I'm pretty sure it's dry underneath. Anything else I can look for? Thanks for helping.
Back to top
libertyappl  
#4 Posted : Thursday, August 21, 2008 7:58:53 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Look for any calcium buildup down the side of the pump or motor. also look for rust on the motor.
Back to top
abadfish66  
#5 Posted : Thursday, August 21, 2008 8:15:03 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Most likely it is a stuck seal. They make a seal kit for these. On ge brand dishwashers when this happens, we just turn the motor till it breaks free, and it will work just fine, not to sure if it's the same for your washer.
Back to top
richappy  
#6 Posted : Sunday, August 24, 2008 3:19:44 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Try to turn the motor by sticking a screwdriver in the end of the motor. If jammed, you will need to clean out the pump.
Unfortunately, for this dishwasher, you will need to pull out the dishwasher, remove the large rubber pump output hose and check for things jamming the pump.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET