Dryer Does Not Maintain Flame - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Dryer Does Not Maintain Flame Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LDG9304AAE	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

htdgbob		#1 Posted : Tuesday, November 30, 2010 3:12:33 PM(UTC)
Rank: Member Groups: Registered Joined: 11/30/2010(UTC) Posts: 3		The igniter lights up, the flame starts and then turns off. the igniter lights up again, and the gas does not come out. this is repeatable. I have tested for continuity, the flame sensor, igniter, the high limit thermostat and I think the cycling themostat, it had four contacts. I will check the fuse. I have also checked the coils for resistence, there are two and they are within the limits recommended. Does anyone have any ideas. I hate to by another dryer at this point in time. I appreciate any help provided.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Tuesday, November 30, 2010 7:09:33 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a bad gas valve coils even if they passed the continuity test. These coils very often are affected by the heat around. - The coil kit Part number: AP3094251 Here are the breakdown diagrams and Replacement parts for MAYTAG LDG9304AAE DRYER- GAS \| AppliancePartsPros.com Gene. P.S. An intermittent problems with thermostats and/or fuses are impossible.


User Profile View All Posts by User View Thanks

htdgbob		#3 Posted : Friday, December 3, 2010 1:41:38 AM(UTC)
Rank: Member Groups: Registered Joined: 11/30/2010(UTC) Posts: 3		Originally Posted by: Gene Most likely the problem is a bad gas valve coils even if they passed the continuity test. These coils very often are affected by the heat around. - The coil kit Part number: AP3094251 Here are the breakdown diagrams and Replacement parts for MAYTAG LDG9304AAE DRYER- GAS \| AppliancePartsPros.com Gene. P.S. An intermittent problems with thermostats and/or fuses are impossible. Thank you,thank you. Got the parts in one day from PartsSelect, and installed them very quickly. Drying clothes just like new. Thank you for your excellent advice.


User Profile View All Posts by User View Thanks

htdgbob		#4 Posted : Friday, December 3, 2010 1:44:48 AM(UTC)
Rank: Member Groups: Registered Joined: 11/30/2010(UTC) Posts: 3		Thank you. I got the parts from AppliancePartsPros in one day, put them in and am drying clothes just like new. Thank you for your clear diagnostic help. It was right on the money! (about $25 total)


User Profile View All Posts by User View Thanks

Gene		#5 Posted : Friday, December 3, 2010 2:47:17 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. I'm glad you were able to fix it. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close