Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
spkolluri  
#1 Posted : Wednesday, November 24, 2010 10:55:48 AM(UTC)
Quote
spkolluri

Rank: Member

Groups: Registered
Joined: 11/24/2010(UTC)
Posts: 2

I am having an issue with my Oven

1. A few days ago, I just foind the oven dead (all the lights on the control panel were off) - the key board seemed to work, as it beeped each time I presses a key - but I could not see what I was pressing
2. I figured that the control panel was blown - I ordered a new one - Part # AP4701078 (W10244191)
3. I fitted the control panel, and now I get an Error - E1 - F2.
4. In prior requests/responses I notice that the cable from the key panel to the control board couls be loose
5. I notice that the new control part had a different conenctor (16 pins - instead of 14 pins on the original part.
6. I tried to match up the first 14 pins on the new part to the key panel cable- leaving the last 2 free..
7. Still having the same issue - E1-F2

Anybody else face a simiar issue with the connector mismatch (16 pins vs 14 pins?)

Looking for any guidance/help
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
spkolluri  
#2 Posted : Wednesday, November 24, 2010 12:01:11 PM(UTC)
Quote
spkolluri

Rank: Member

Groups: Registered
Joined: 11/24/2010(UTC)
Posts: 2

:)

The trick is that if your new control board has 16 pins, use pins numbers 3 to 16 to match up with the cable from the keypad.

I connected thus, and my keys started working.

Caution: this is ony for those that get a control panel where the interface to the kaypad has 16 pins, while keypad cable has ony 14.

Thanks,
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.