replacing lower spray arm Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: DU943PWKB0	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

bobmichael		#1 Posted : Saturday, September 22, 2007 9:36:22 AM(UTC)
Rank: Member Groups: Registered Joined: 9/21/2007(UTC) Posts: 3		lower spray arm needs replacing. got a replacement and bearing ring. looks like the spray arm connects to the outlet via a shaft through the center. is this shaft a separate part, can't find it on the diagram? or is it the nylon radial bearing ring shown on the diagram?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

richappy		#2 Posted : Sunday, September 23, 2007 2:54:06 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Just remove the plastic nut holding the spray arm in, and replace spray arm.
User Profile View All Posts by User View Thanks

bobmichael		#3 Posted : Sunday, September 23, 2007 8:17:11 PM(UTC)
Rank: Member Groups: Registered Joined: 9/21/2007(UTC) Posts: 3		Originally Posted by: richappy Just remove the plastic nut holding the spray arm in, and replace spray arm. there seems to be a shaft or maybe the nylon bearing ring that is broken, because there's nothing to tighten the plastic nut on. Suggetions???
User Profile View All Posts by User View Thanks

richappy		#4 Posted : Monday, September 24, 2007 2:44:54 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		You will need to pull the housing off that supports the spray arm and inspect for stripped threads that the nut goes on.
User Profile View All Posts by User View Thanks

bobmichael		#5 Posted : Monday, October 1, 2007 7:54:13 PM(UTC)
Rank: Member Groups: Registered Joined: 9/21/2007(UTC) Posts: 3		The spray arm sits on the Housing (AP2904413). In the center of the Housing, it looks like there is a shaft of some sort that the nut goes on; it is broken off. From the diagram, it looks like the Nylon Radial Bearing Ring. Is this it? Nothing else seems to be brken.
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Tuesday, October 2, 2007 1:27:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		Your spray arm is retained with a plastic nut that screws on the upper housing. It is not shown on the diagrams so just call and appliancepartspros will know what part to get. Make sure your upper housing threads are ok, otherwise order that too.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

Similar Topics

Replacing lower spray arm KitchenAid dishwasher (Dishwasher Repair) by IggyDad 9/11/2013 2:56:37 PM(UTC)