Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
burks  
#1 Posted : Thursday, September 20, 2007 4:51:59 AM(UTC)
burks

Rank: Member

Groups: Registered
Joined: 9/20/2007(UTC)
Posts: 1

I've noticed my washing machine has been taking 2 hours + for the complete cycle to complete. Normally it would have taken 1/2 hour. It seems it is getting stuck on the last spin cycle. When it is finished with the complete cycle, the clothes are almost dry from spinning so long! Then last night during the last rinse cycle, it just started humming and I could not get it to spin out the water. We replaced the timer in February of this year, could it be that timer again, or something else?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Friday, September 21, 2007 1:57:58 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You have a Kingston timer that you can't apart, so you will need a meter to check things. I would start by measuring the motor current and also see if your timer motor has voltage to it during spin
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.