AppliancePartsPros.com
»
Appliance Repair Help
»
Washer Repair
»
Whirlpool Calypso Washer - There is power, but does not respond to any commands
Rank: Member
Groups: Registered
Joined: 8/1/2008(UTC)
Posts: 1
|
Hi, I have a Whirlpool Calypso Washer and it will not respond to any commands. The panel always reads 44 minutes just as if you were select the normal wash for your cycle. It does not respond to any other buttons being pushed. If you were to unplug the washer and then plug it back in, it immediately comes back on with the same display again without you having to push anything. I am just not sure what part could be the problem. Is it the control board or the touch panel itself. Any advice or guidance that you could give would be great.
Thank you for your help.
D
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/23/2008(UTC)
Posts: 1
|
I have the same problem. Did you get your machine fixed? What was the problem? Trying to decide to repair or replace this piece of junk. Thanks.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
|
I have a service manual I'll get back to ya on what to check
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/13/2009(UTC)
Posts: 1
|
I have the same problem on my washer... please let me know what you did to repair your washer? Thanks in advance for your help.
Jon
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
|
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/18/2010(UTC)
Posts: 1
|
Our Whirlpool washer is GVW9959KQ0, bought in September 2001,
in September 2010 it had the problem as follow.
When the panel was lite up, it was always set at "44" minute, NORMAL wash,
no touch area is responsive, not even STOP or START.
Since the washing functionality sounds and looks working well to me,
I thought that the panel might be the culprit.
We ordered Control Panel Assembly (Parts AP3884746,
it is just the panel part where we touch for washing selections
w/o electronic boards behind it) at appliancepartspros.com
(cost $177 + regular S&H, arrived in 2 business days),
as suggested by many posters in the internet who has almost
exact same problems. It works for now, just had 3 consecutive loads.
Hope it works for years to come... BTW, our drier had the same problem,
back then 4 years ago, its Panel Assemby was also replaced.
hese problems happened after we had power outage, probably power surge,
during storms.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/17/2011(UTC)
Posts: 2
|
Hi NSSS, im havng the same propblem with my Calypso washer. Planing to order the Control Panel Assembly, but before doing so like to check with you on how yours is performing. my washer lite up showing 28 minute and after which no touch area is responsive as well.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/17/2011(UTC)
Posts: 2
|
Can anyone at APP send me a diagram on how to replace the Control Panel Assembly AP3884746 on the Whirpool Calypso Model #GVW9959KTO as suggested by NSSS. we do have the same problem on this model. Thanks.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
|
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
AppliancePartsPros.com
»
Appliance Repair Help
»
Washer Repair
»
Whirlpool Calypso Washer - There is power, but does not respond to any commands
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
