Cold water will not stop running - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Cold water will not stop running Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.20922990	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

tacohead59		#1 Posted : Thursday, July 31, 2008 2:33:08 PM(UTC)
Rank: Member Groups: Registered Joined: 7/8/2008(UTC) Posts: 11 Location: 1140 Bluegrass Lane		I start my wash, and when it fills to set level, the cold water keeps filling the machine as it kicks on to wash. In the past, it would stop after a minute or two, but now it won't stop. Our washer ran over and flooded our laundry room. The cold water supply cutoff has to be cut off manually or it will over fill. Thanks, any help you can provide will be greatly appreciated. Denise


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

abadfish66		#2 Posted : Thursday, July 31, 2008 2:36:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		Does it fill when the machine is turned off?


User Profile View All Posts by User View Thanks

tacohead59		#3 Posted : Thursday, July 31, 2008 3:11:48 PM(UTC)
Rank: Member Groups: Registered Joined: 7/8/2008(UTC) Posts: 11 Location: 1140 Bluegrass Lane		Yes, the cold water continues to run when the machine is turned off. Thank you.


User Profile View All Posts by User View Thanks

abadfish66		#4 Posted : Thursday, July 31, 2008 3:35:25 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		You need a new water valve.


User Profile View All Posts by User View Thanks

tacohead59		#5 Posted : Thursday, July 31, 2008 3:44:50 PM(UTC)
Rank: Member Groups: Registered Joined: 7/8/2008(UTC) Posts: 11 Location: 1140 Bluegrass Lane		I looked up water valve in sears parts and cannot find it.


User Profile View All Posts by User View Thanks

abadfish66		#6 Posted : Thursday, July 31, 2008 3:51:10 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		Here you go Part Details - WHIRLPOOL Inlet water valve, part number: 285805


User Profile View All Posts by User View Thanks

tacohead59		#7 Posted : Thursday, July 31, 2008 4:54:57 PM(UTC)
Rank: Member Groups: Registered Joined: 7/8/2008(UTC) Posts: 11 Location: 1140 Bluegrass Lane		i took the supply hoses of of the water valve and the screens are not there. I have some fine sediment in water . Could I take the valve apart and clean the vavle thoroughly and try that first.


User Profile View All Posts by User View Thanks

richappy		#8 Posted : Friday, August 1, 2008 3:06:31 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		I would NEVER do that, unless you like a flood. Need a new valve with well fitting screens. Also, make sure your cold water pressure is "normal".


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close