Rank: Member
Groups: Registered
Joined: 7/20/2008(UTC)
Posts: 6
|
Initially the ice dispenser door would not close. With the dispenser door open there was substasntial ice build-up on the ice draw mechanism. Not realizing this I gave it a go after repositioning the lever so the flap would close. It seems like a circuit was tripped and a breaker has to be reset, because even after removing the ice buildup and freeing up the mechanics, the draw mechanism does not activate to dispense the cubes. I'm confident that there is no such breaker and am unsure what else to check.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Does it dispense water or it's completely dead?
Does it make any noise (clicking, humming, etc) when you try to use it?
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/20/2008(UTC)
Posts: 6
|
Water is fine.
No hum or any noise at all.
With door open, I depressed the door switch and pressed the ice dispenser, no noise or action with ice bin in or out.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Check the wire harness under the freezer door. Remove the dispenser front cover and visually inspect all parts and wire harness. If there is nothing wrong then the front cove assembly has to be replaced. In order to provide the right part number I need the color of the front cover. Here are the break down diagrams fro the Kitchen Aid refrigerator Model KSCS25FKSS01Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/20/2008(UTC)
Posts: 6
|
Initially, in order to reposition the lever, I did disconnect wires and remove the bracket. I have since checked all connections and reassembled, to no avail.
The color of the cover assy is black. Looks to me like part #AP3126702.
Ouch! She's not a cheap date, that's for sure.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Yes, the part number is correct. Keep us posted.
Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
