Rank: Advanced Member
Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
|
hi guys customer complained dishwasher will go through entire cycle washing dishes perfectly. to begin next load she has to reset breaker , then d/w will wash perfectly ,at end of cycle clean light will blink steadily but will no start till breaker is reset ,then will wash perfectly again , i replaced control panel part # 154370303+ control board#154445801 still does the same thing ,any ideas ,like defective new control board?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
|
i checked door switch visually+with meter , if it was a door switch issue ,how would switching breaker off and on correct door switch ,the door was not opened +closed , it was left as is . then breaker was switched off + on ,+d/w would start when start button was pushed.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/8/2013(UTC)
Posts: 1
|
I have a Kenmore dishwasher that is doing something very similar. I have to reset the breaker in my box in my basement every time in order to use the dishwasher. The dishwasher cleans a load of dishes just fine after I flip the breaker, but the next time we try to turn it on, it won't start. Flipping the switch causes all the lights on the control panel to come back on flashing, and allows me to start the dishwasher again for another load.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
