Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

3 Pages123>
Options
Go to last post Go to first unread
atlsud  
#1 Posted : Wednesday, September 15, 2010 1:34:03 PM(UTC)
atlsud

Rank: Member

Groups: Registered
Joined: 9/15/2010(UTC)
Posts: 12

My french door LG brand fridge's light is not turning off. It actually melted the plastic housing which I now need to replace. There are two 'buttons ' that are pressed when the doors are closed. I hear the fan turn on when these are depressed but the lights remain on. Any idea on how to fix this?

Thanks.
Tom
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, September 15, 2010 4:10:07 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Tom,

Check the switches by the upper door hinges.

Gene.
atlsud  
#3 Posted : Wednesday, September 15, 2010 4:35:53 PM(UTC)
atlsud

Rank: Member

Groups: Registered
Joined: 9/15/2010(UTC)
Posts: 12

Gene,

The switches on the upper part of the door are the buttons I mentioned. When both of these switches are depressed the light should turn off and the fan turn on but only the fan turns on. The light remains lit. I have disconnected the entire light assembly so the interior of the fridge does not melt but I am at a loss.

Any ideas why the the light does not recognize that the switches are depressed while the fan clearly does?

Thanks,
Tom
Gene  
#4 Posted : Friday, September 17, 2010 12:18:41 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Tom,

The first possible answer is: this switch is bad.

Gene.
etsierka  
#5 Posted : Friday, September 17, 2010 2:13:18 PM(UTC)
etsierka

Rank: Member

Groups: Registered
Joined: 9/17/2010(UTC)
Posts: 6

I have the exact same problem with my Kenmore Elite refrigerator. I think the switch is good because it turns the fan on and off and I opened up the switch, and mechanically, it is working fine. I was told that the likely problem is the main printed circuit board on the back of the refrigerator, but I want to get a second opinion before I spend $90 or more on that new part.
atlsud  
#6 Posted : Friday, September 17, 2010 7:59:34 PM(UTC)
atlsud

Rank: Member

Groups: Registered
Joined: 9/15/2010(UTC)
Posts: 12

Originally Posted by: etsierka Go to Quoted Post
I have the exact same problem with my Kenmore Elite refrigerator. I think the switch is good because it turns the fan on and off and I opened up the switch, and mechanically, it is working fine. I was told that the likely problem is the main printed circuit board on the back of the refrigerator, but I want to get a second opinion before I spend $90 or more on that new part.


etsierka,

Please keep me posted on your diagnosis.
Gene  
#7 Posted : Monday, September 20, 2010 12:50:47 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: etsierka Go to Quoted Post
I have the exact same problem with my Kenmore Elite refrigerator. I think the switch is good because it turns the fan on and off and I opened up the switch, and mechanically, it is working fine. I was told that the likely problem is the main printed circuit board on the back of the refrigerator, but I want to get a second opinion before I spend $90 or more on that new part.


What is the complete model number of the refrigerator?

What exactly is wrong?

Gene.
etsierka  
#8 Posted : Wednesday, September 22, 2010 12:24:36 PM(UTC)
etsierka

Rank: Member

Groups: Registered
Joined: 9/17/2010(UTC)
Posts: 6

The model number of my refrigerator is 795.77542600 (Kenmore Elite). As stated earlier in the thread, I have the exact same problem as atlsud - the light doesn't turn off when the doors are closed. The light bulb gets so hot that it melts plastic, etc. The switches on the top of the door hinges appear to work fine. Could it be that the main pcb assy on the back panel of the refrig is bad and needs replaced? What are other likely causes? Thanks.
magician59  
#9 Posted : Wednesday, September 22, 2010 12:48:39 PM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273

Open the door and close the switch with your hand. Does the light go out? If it does, there is a problem with the alignment of the door and switch; The door is not making contact with the switch.
etsierka  
#10 Posted : Wednesday, September 22, 2010 3:03:28 PM(UTC)
etsierka

Rank: Member

Groups: Registered
Joined: 9/17/2010(UTC)
Posts: 6

I have tried that already. The light does not go out. Not an alignment problem.
Users browsing this topic
Guest (5)
3 Pages123>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.