Rank: Member
Groups: Registered
Joined: 1/21/2008(UTC)
Posts: 1
|
Red light is blinking over the normal cycle button. Occasionally after doing the button dance it will respond to the cancel/drain button. I have checked the sump and found no clogging. I have tried pushing the santi wash / heated dry buttons five times each. I turned off the main power for several minutes. When power was restored the blinking lights were gone but once the first button was pushed the red light over the normal cycle started blinking again. Dishwasher is less than three years old and has not been used regularly. 
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/11/2009(UTC)
Posts: 1
|
Funny I just fixed my blinking light thanks to sites like this one. I simply followed these instructions.
1. Make sure the door is closed
2. Press the Heated dry, Normal wash, Heated dry, Normal wash
All of the ligth on the panel lite up and the disher was reset and the blinking light stopped. Save myself $115.00 service fee.
Try it see if it works for you! :D
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/13/2009(UTC)
Posts: 1
|
Heated Dry, Normal Wash, Heated Dry, Normal Wash and the dishwasher "rebooted" running through a bunch of diagnostic lights along the way.
Thanks $125 worth!!!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/5/2010(UTC)
Posts: 1
|
Heated Dry, Normal Wash, Heated Dry, Normal Wash worked for me too! Yea!!!! Thank you!!!!!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/16/2011(UTC)
Posts: 1
|
Thank you so much for the solution to my mystery blinking clean light! Heated Dry, Normal Wash, Heated Dry, Normal Wash is my new mantra.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/8/2011(UTC)
Posts: 1
|
This is terrific! It worked for me, too. Thanks for posting this helpful info.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/26/2011(UTC)
Posts: 1
|
Originally Posted by: Sandie  Funny I just fixed my blinking light thanks to sites like this one. I simply followed these instructions.
1. Make sure the door is closed
2. Press the Heated dry, Normal wash, Heated dry, Normal wash
All of the ligth on the panel lite up and the disher was reset and the blinking light stopped. Save myself $115.00 service fee.
Try it see if it works for you! :D It worked and saved the day on Thanksgiving! Thanks! I would have been a bit upset to pay a service tech $125 to unlock that secret code. What a racket.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/1/2012(UTC)
Posts: 1
|
thank you to all who cared to share this valuable info!!!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/14/2012(UTC)
Posts: 1
|
Wow! This just worked for me too. In my case it was the "Clean" light that would not stop blinking.
You guys are great! Thank you!
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/15/2013(UTC)
Posts: 1
|
I just wanted to say thanks for the info. That was very cool of you to share that with everyone and if anyone needs answers to appliance repair problems I'm definitely going to refer them to this site!
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
