Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
BruceL  
#1 Posted : Sunday, July 22, 2007 1:49:04 PM(UTC)
BruceL

Rank: Member

Groups: Registered
Joined: 7/22/2007(UTC)
Posts: 1

I have a Kenmore range that shows only 8's on the ERC display. I cut the power for a couple of minutes, no change. I'm guessing the ERC, it is just a guess. Thanks Bruce
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Admin / APP Team  
#2 Posted : Sunday, July 22, 2007 9:20:44 PM(UTC)
Admin / APP Team

Rank: Administration

Groups: Registered
Joined: 7/18/2007(UTC)
Posts: 799

Was thanked: 1 time(s) in 1 post(s)
Good guess. Whether it's hard to read the display or some of the digits are not showing, the board (ERC) is the problem. Could you double check the model number? 911.30469292 does not come up, it's probably a digit off. Post the model number here and I'll send you a direct link to the new board.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.