Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bechbear61  
#1 Posted : Wednesday, July 28, 2010 5:42:44 PM(UTC)
bechbear61

Rank: Member

Groups: Registered
Joined: 7/28/2010(UTC)
Posts: 1

My refrig has manufactors date of 10-1986, the freezer works fine but every now & then the refrig is doesn't keep as cold. I pulled it out and at the bottom one small part was iced over about 2 ". I turned it off unplugged it, ran hair dryer to melt the ice, turned it back on & it took overnight to get it back to regular temp. but noticed a thin ice starting again, just in one area of the bottom. Any one have ideas??? maybe I can email a picture. I know I've been lucky. Is it worth having someone come out and look at it?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Thursday, July 29, 2010 1:19:36 AM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
Originally Posted by: bechbear61 Go to Quoted Post
My refrig has manufactors date of 10-1986, the freezer works fine but every now & then the refrig is doesn't keep as cold. I pulled it out and at the bottom one small part was iced over about 2 ". I turned it off unplugged it, ran hair dryer to melt the ice, turned it back on & it took overnight to get it back to regular temp. but noticed a thin ice starting again, just in one area of the bottom. Any one have ideas??? maybe I can email a picture. I know I've been lucky. Is it worth having someone come out and look at it?


I'm not sure where you are seeing the ice. Is it on the coils in the freezer area or on the tubing in the compressor area?
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.