Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Ice maker Still not working
Options
Go to last post Go to first unread
Model: KBRP20EMSS00 Brand: Kitchen Aid Age: 1 - 5 years
Previous Topic Next Topic
majim  
#1 Posted : Thursday, June 10, 2010 6:22:16 AM(UTC)
majim

Rank: Member

Groups: Registered
Joined: 6/8/2010(UTC)
Posts: 7
Problem:
Ice maker stopped working no water coming into it.

After reading every related blog this is what I have done:
1. I changed the filter.
2. Replaced the Dual water valve.
3. Exchanged the leads to the water valve and got water into the icemaker.
4. Used the multimeter as directed on one of the blogs but got NO reading at all.
5. Connected a wire into the labeled holes and nothing happened.

Question is: Is there anything else I can replace before buying a new icemaker?
:(
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Thursday, June 10, 2010 1:48:13 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Make sure the freezer temperature is below 15 degrees.
Back to top
majim  
#3 Posted : Saturday, June 12, 2010 7:24:38 AM(UTC)
majim

Rank: Member

Groups: Registered
Joined: 6/8/2010(UTC)
Posts: 7
Thank you for answering. The temperature was set as indicated but no ice being dump in the bucket. I'm afraid I might have to replace it unless you can think of something else.
Back to top
richappy  
#4 Posted : Sunday, June 13, 2010 1:01:10 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
If you get 115 volts to the icemaker and it fails to work, you probably need a new icemaker.
Back to top
majim  
#5 Posted : Tuesday, June 15, 2010 12:20:00 PM(UTC)
majim

Rank: Member

Groups: Registered
Joined: 6/8/2010(UTC)
Posts: 7
I bought the icemaker replacement kit. Can I install from the front of the refrigirator only shutting the water supply or do I have to unhook the water lines on the back. There were no instructions included.
Back to top
richappy  
#6 Posted : Tuesday, June 15, 2010 1:42:14 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Just three screws to remove and a connector, you can do it with the fridg plugged in.
Back to top
majim  
#7 Posted : Wednesday, June 16, 2010 6:07:37 AM(UTC)
majim

Rank: Member

Groups: Registered
Joined: 6/8/2010(UTC)
Posts: 7
Thank you. I will post my results with the new ice maker.
You have been very helpful.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Ice Maker still not working (Refrigerator & Freezer Repair)
by ShaneH 9/20/2007 9:57:01 AM(UTC)
ice maker still not working Fridigaire (Refrigerator & Freezer Repair)
by amberfi 8/19/2007 7:44:42 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET