3 Pages123> Go to Page...

Kenmore Series 90 Washer Auger not spinning Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 110.20922990	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

howiey@yahoo.com		#1 Posted : Thursday, January 24, 2008 1:18:02 PM(UTC)
Rank: Member Groups: Registered Joined: 1/24/2008(UTC) Posts: 6		hi, I have a Kenmore Series 90 washer 8yo. Model110.20922990 The problem is that the Auger on the agitator does not move all of the time. It is suppoosed to draw the clothes into the water. Sometimes it does and other times it seems to slip. I took apart down to the agiitator and everything seems to be fine. I did not see any broken or chipped parts. Is there a part below the agitator it that is suppossed to engage the Auger and may be causing the problem? thanks
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Friday, January 25, 2008 12:28:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem caused by the worn out agitator cam dogs (#21 on the break down diagram). In order to remove the auger, remove the agitator cap (#1 on the break down diagram) and unscrew the retainer (#22 on the break down diagram). You will need a 1/2" socket wrench driver to remove the retainer. - The part number for the agitator repair kit is AP3094544 Gene.
User Profile View All Posts by User View Thanks

howiey@yahoo.com		#3 Posted : Wednesday, January 30, 2008 6:33:04 PM(UTC)
Rank: Member Groups: Registered Joined: 1/24/2008(UTC) Posts: 6		gene's assessment was spot on and it took less than 5 minutes to fix. I ordered the part and it was here the next day even though i used economy. Thank you Gene!
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, January 30, 2008 7:08:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I'm glad you were able to fix it. Gene.
User Profile View All Posts by User View Thanks

massager		#5 Posted : Friday, May 16, 2008 9:49:54 AM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2008(UTC) Posts: 5		I know my dogs need replaced but when I go to take it apart the pin that holds the retainer sping in is just that a pin.No way to unscrew it. I have a Kenmore 90 series model #110.28922790. I do not know if there is a trick to it suck as, pull up on one part to loosen another. Any help would be greatful Thanks
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Friday, May 16, 2008 2:37:56 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I did not get what part are you talking about. Can you refer to a references number on the break down diagram? Gene.
User Profile View All Posts by User View Thanks

massager		#7 Posted : Saturday, May 17, 2008 6:51:26 AM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2008(UTC) Posts: 5		Gene, the part # is 21. on the diagramn. thanks
User Profile View All Posts by User View Thanks

massager		#8 Posted : Monday, May 19, 2008 8:49:45 AM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2008(UTC) Posts: 5		Gene, Hi from massager I forgot to tell you the part that I need to get out is 22 on the part list. It has a pin in it , I thought thier might be a trick to get it out. Thanks
User Profile View All Posts by User View Thanks

massager		#9 Posted : Tuesday, May 20, 2008 7:29:44 AM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2008(UTC) Posts: 5		Gene, Haven't heard from you on the washer problem. Maybe you did not get my post. The part # is 22 that I need to remove to replace part #21. Thanks massager.
User Profile View All Posts by User View Thanks

Gene		#10 Posted : Tuesday, May 20, 2008 7:15:57 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		This is the retainer which should be unscrewed and you have to use a 1/2" socket wrench driver to do it. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (6)

3 Pages123> Go to Page...